Data sheet

STANDARD Microfilter (sub-microfilter) G 3/8", Standard 1
Item number:
DFX 12 S
Example illustration
Item description
Application:
Microfilters are used where high requirements are required for the purity of the compressed air requirements. Finest particle (> 0,01 µm) and oil mist is separated here. We recommend the upstream connection of a prefilter to increase the service life.
Materials:
Body: Zinc die-casting Z410, condensate container: Polycarbonate, filter insert: Borosilicate microfibre fleece
Temperature range:
0°C to max. +50°C (metal bowl up to max. +90°C)
Dust removal:
> 0,01 µm (99,999 %)
Residual oil content:
0.01 mg/m³ (Class 1 according to DIN ISO 8573-1)
Input pressure:
1.5 - 16 bar (with metal bowl 0 - 25 bar)
Condensate draining:
Semi-automatic** (metal container: manual)
Media:
Compressed air, neutral gases
Optional:
Version with protection cage (not series 5)-S, version with metal tank with manual drain (0 - 25 bar) -M
Properties
Ver­sion Mi­cro­fil­ter (sub-​microfilter)
Model se­ries Stan­dard 1
Thread G 3/8"
Flow* [l/min] 610
Con­tainer de­sign Plas­tic con­tainer with pro­tec­tive cage
Con­den­sate drain Semi-​automatic
Mount­ing brack­ets ZW DFX 10
Re­place­ment fil­ter 0,01 µm FIL­TER DFX 10
input pres­sure [bar] 1,5 - 16
Tem­per­a­ture range [°C] 0 to +50
Max. con­den­sate amount [cm³] 12
H [mm] 154
H1 [mm] 135
L [mm] 50 (Ø 56)
Further information:
Weight 450 g / pcs
GTIN 4050571248482
Customs duty number 84213925
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number DFX 12 S.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 04.06.2025