Data sheet
T compression ring fitting G 1/2"-14 (M20x1,5)mm, brass
Item number:
KTH 1214 MS
Example illustration
Item description
Temperature range:
-60°C up to max. +300°C (with seal: -20°C up to max. +80°C)
Recommended raw materials:
Copper, polyamide (with reinforced sleeve)
Note:
The brass compression ring screw connections cannot be combined with the cutting ring pipe screw connectors ISO 8434-1 (DIN 2353). When using soft copper tube a correction factor of 0.65 must be used (pressure x 0.65). When using polyamide tube the operating pressure of the tube applies.
Materials:
Body: Brass, seals: Zinc plated steel, with NBR insert
Properties
| Pipe diameter (outer) [mm] | 14 (M20x1,5) |
| Screw-in thread | G 1/2" |
| Operating pressure with hard copper tube [bar] | 89 |
| Temperature range [°C] | -20 to +80 |
Further information:
| Weight | 240 g / pcs |
| GTIN | 4050571457624 |
| Customs duty number | 74122000 |
| RoHS compliant | Yes |
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number KTH 1214 MS.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 20.07.2025