Data sheet
Tilt lever valve 2/2-way, G 1/8"-4 mm
Item number:
K 21804
Example illustration
Item description
Materials:
Body: Nickel-plated brass, internal parts: brass / stainless steel, seal: NBR
Temperature range:
-5 to +70 °C
Operating pressure:
0 - 8 bar (banjo valve 2/2-way and 3/2-way with pressure inlet ring piece: 0 - 10 bar)
Media:
lubricated and unlubricated, filtered compressed air, neutral gases
Advantages:
•low price,
•extensive application options,
•simple and fast setting up of a circuit,
•rocker lever can be positioned
•extensive application options,
•simple and fast setting up of a circuit,
•rocker lever can be positioned
Application:
To actuate single-acting cylinders, screw the 3/2-way valve (K 3...) directly in the cylinder.
Required mounting hole for panel mounting:
Ø 12.5 mm, maximum sheet thickness: 4 mm (bulkhead thread: M 12x1, tie-rod valve 2/2-way and 3/2-way with pressure inlet ring piece: M 12x0.75)
Properties
| Pressure input | Hollow screw or ring piece |
| Banjo design | Push-in fitting |
| function | 2/2-way |
| Banjo bolt Screw in thread | G 1/8" |
| Ring piece hose diameter (outer) [mm] | 4 |
| flow [l/min] | 235 |
| Nominal width [mm] | 3 |
Further information:
| Weight | 39 g / pcs |
| GTIN | 4050571391652 |
| Customs duty number | 84812090 |
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number K 21804.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 20.07.2025