Data sheet

pressure booster (2 : 1) to 1.000 l/min with 10 l container
Item number:
DUE 1000 B10
Example illustration
Item description
Completely plumbed with compressed air reservoir and pressure gauge
Application:
The pressure booster increases the input pressure to the value set on the control valve. The outlet pressure can measure max. four or. 2two times the input pressure, but can never exceed the max. outlet pressure. Should an individual consumer (clamping cylinder etc.) be operated with a pressure higher than the standard network pressure, the pressure booster can accordingly increase the supply pressure for this single consumer. An installed pressure regulator maintains a constant working pressure (with less pulsation).
Advantages:
High energy saving and no electrical energy necessary directly on consumer. For a further consumer, it is not necessary to pretension the entire compressed air network to a higher level.
Media:
Filtered, unoiled compressed air
Installation position:
horizontal
Temperature range:
+5 to +50 °C
Properties
Gear ra­tion max. 2 : 1
Out­let pres­sure [bar] 2 - 10
Flow ca­pac­ity* [l/min] 1.000
Con­tainer con­tents [LTR] 10
Com­pressed air con­nec­tion 2 x quick cou­pling socket NW 10
Wear part set DUE 1000 A REP
Further information:
Weight 16 kg / pcs
GTIN 4050571276782
Customs duty number 84148028
Drawing:
Drawing: Pressure booster
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number DUE 1000 B10.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 06.06.2025