Proportional pressure regulator G 1/8", 0 do 1 bar, 0–10 V, za tirnico DIN
Št. Izdelka:
DRPD 18-1
Vzorčni prikaz
Opis artikla
Version:
The proportional pressure regulator regulates the pressure on the secondary side in proportion to an electric input signal (0 - 10 V or 4 - 20 mA).
Tip:
For larger flow rates, elevated temperatures, aggressive environments and the like, the proportional pressure regulator can also be used as a pilot regulator for a remote pressure regulator (booster) type DRi (for standard applications) or FDRi 03 (for precision control and large venting capacities).
Media:
fine-filtered compressed air (3 µm) & neutral gases, unoiled
Temperature range:
-10 do +60 °C
Power supply:
15 do 24 V (DC)
Power input:
max. 325 mA (DIN rail mounting: max. 250 mA)
Protection class:
IP 65 (DIN rail mounting: IP 00)
Electrical connection:
M 12 plug (A-coded, 4-pole) (DIN rail mounting: screw terminals)
Linearity:
± 0,2 % from end value
Repeatability:
± 0.2 % from end value
Hysteresis:
1 % of the end value
Accuracy:
± 0,5 % of the end value
Output signal (monitor):
0–10 V
Lastnosti
Vho­dni si­gnal 0 - 10 V
Obli­ka za tir­ni­co DIN
Navoj G 1/8"
Ob­mo­čje re­gu­li­ra­nja tlaka 0 - 1
Pre­tok 35
od­zra­če­va­nje 35
Vho­dni tlak (naj­manj­ši na­sta­vlje­ni tlak) 0 - 2,1
Dodatne informacije:
Teža 260 g / Kos
GTIN 4050571271718
Številka carinskega blaga 90328100
Risba:
Risba: Proportional pressure regulator for line installation and switch cabinet mounting, DIN rail mounting
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Nemčija
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Stanje: 21.06.2025