Easy vacuum-pressure PU coiled tubes (will be discontinued)

Documents

Description

Materials:
Thin-walled polyester-polyurethane coating with a coppered / bronze steel wire coil incorporated in the wall, type LE: additional resistance to hydrolysis by use of polyether-polyurethane

Temperature range:
-40°C bis +90°C

Wall thickness:
approx. 0.4 - 0.5 mm

Application:
High tear and abrasion resistance, high elasticity and aging resistance. No plasticizer additives, resistant to solvents, oils, grease, wax and petrol to a large extent, bend resistant. The transparency helps to monitor the working processes in the hose very effectively.

Suitable:
Suction of gases, chipping, oil mist, fog, dust, ventilation technology, mechanical engineering

Compression capacity:
approx. 30 %

Advantages:
•PU hose is often more abrasion resistant than the common rubber hose

Find the right item

Hose Ø inside [mm]
Min. bend radius [mm]
Operating pressure [bar]
Roll length [MTR]

Easy vacuum-pressure PU coiled tubes (will be discontinued): 5 of 5 items

Suction-pressure coil hose PUR light 75mm Standard
  • Version

    Standard

  • Hose Ø inside [mm]

    75

  • Min. bend radius [mm]

    53

  • Operating pressure [bar]

    -0.10 to 0.30

  • Roll length [MTR]

    15

Immediately available

26,26 €

Suction-pressure coil hose PUR light 140mm Standard
  • Version

    Standard

  • Hose Ø inside [mm]

    140

  • Min. bend radius [mm]

    95

  • Operating pressure [bar]

    -0.07 to 0.15

  • Roll length [MTR]

    15

Immediately available

51,65 €

Suction-pressure coil hose PUR light 175mm Standard
  • Version

    Standard

  • Hose Ø inside [mm]

    175

  • Min. bend radius [mm]

    123

  • Operating pressure [bar]

    -0.05 to 0.10

  • Roll length [MTR]

    10

Immediately available

59,18 €

Suction-pressure coil hose PUR light 350mm Standard
  • Version

    Standard

  • Hose Ø inside [mm]

    350

  • Min. bend radius [mm]

    245

  • Operating pressure [bar]

    -0.02 to 0.02

  • Roll length [MTR]

    10

Immediately available

140,12 €

Suction-pressure coil hose PUR light 450mm Standard
  • Version

    Standard

  • Hose Ø inside [mm]

    450

  • Min. bend radius [mm]

    315

  • Operating pressure [bar]

    -0.01 to 0.01

  • Roll length [MTR]

    10

Immediately available

167,57 €

All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.