Heavy suction pressure PU coil tubes (will be discontinued)

Documents

Description

Materials:
Thick walled polyester polyurethane coat with a PVC-coated steel coil embedded in the wall. The inner walls are relatively smooth, type LE: additional resistance to hydrolysis by using polyether polyurethane

Temperature range:
-40°C bis +90°C

Wall thickness:
approx. 1 - 1.2 mm

Application:
Extremely high abrasion resistance due to the reinforced walls. No plasticizer additives, resistant to solvents, oils, grease, wax and petrol to a large extent, bend resistant. The transparency helps to monitor the working processes in the hose very effectively.

Operating range:
Suction technology (industrial suction), wood, pellets, sand, dust, grains, cement, oil, chemical industry, paint and laquer industry, sand blasting technology, industrial cleaning

Advantages:
•PU hose is frequently more abrasion resistant than common rubber hoses, •no settling of the transported material due to the smooth inner wall

Find the right item

Hose Ø inside [mm]
Min. bend radius [mm]
Operating pressure [bar]
Roll length [MTR]

Heavy suction pressure PU coil tubes (will be discontinued): 4 of 4 items

Suction-pressure coil hose PUR heavy 25mm Standard
  • Version

    Standard

  • Hose Ø inside [mm]

    25

  • Min. bend radius [mm]

    38

  • Operating pressure [bar]

    -0.50 to 1.90

  • Roll length [MTR]

    10

Immediately available

36,53 €

Suction-pressure coil hose PUR heavy 125mm Standard
  • Version

    Standard

  • Hose Ø inside [mm]

    125

  • Min. bend radius [mm]

    185

  • Operating pressure [bar]

    -0.25 to 0.80

  • Roll length [MTR]

    30

Immediately available

117,73 €

Suction-pressure coil hose PUR heavy 175mm Standard
  • Version

    Standard

  • Hose Ø inside [mm]

    175

  • Min. bend radius [mm]

    260

  • Operating pressure [bar]

    -0.11 to 0.25

  • Roll length [MTR]

    10

Immediately available

167,11 €

Suction-pressure coil hose PUR heavy 250mm Standard
  • Version

    Standard

  • Hose Ø inside [mm]

    250

  • Min. bend radius [mm]

    375

  • Operating pressure [bar]

    -0.07 to 0.12

  • Roll length [MTR]

    10

Immediately available

267,42 €

All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.