Item group

Way valves NG 6 electically operated in piston design, up to 40 l/min*

Exemplary representation: 4/3-directional hydraulic valve (4/2-directional D/OF) NG 6 Exemplary representation: 4/2-directional hydraulic valve NG 6 Schematic symbol: 4/3-directional valve, H-circuit Schematic symbol: 4/3-directional valve, E-circuit Schematic symbol: 4/3-directional valve, G circuit Schematic symbol: 4/3-directional valve, J-circuit Schematic symbol: 4/2-directional valve, D/OF circuit Schematic symbol: 4/2-directional valve, HA circuit Schematic symbol: 4/2-directional valve, HB circuit Schematic symbol: 4/2-directional valve, D-circuit Schematic symbol: 4/2-directional valve, Y circuit Schematic symbol: 4/2-directional valve, EB circuit

Suitable:

These solenoid-operated way valves are used in hydraulic systems predominantly for starting, stopping and changing the direction of flow of the liquid. Using NG 6 the pressure valve, the flow control valve and the check valve sandwich plates are arranged like a stack to form a circuit in the smallest space possible.

Materials:

Body: Spheroidal cast iron, internal parts: Steel, seals: NBR

Temperature range:

-30°C to +80°C

Media:

Hydraulic oils on the basis of mineral oil (viscosity: Bosch Rexroth: 2,8 - 500 mm²/s, alternatively: 20 - 400 mm²/s)

Control voltages:

Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:

± 10 %

Protection class:

IP 65

Operating pressure:

0 to 350 bar

Nominal flow:

Up to approx. 80 l/min (request pressure loss curves if required), we recommend usage up to approx. 40 l/min

Note:

The connection pattern NG 6 is standardised in accordance with DIN 24340-A6, ISO 4401-03, CETOP R 35 H-03 and NFPA-D03. The valves must be attached with screws of strength class 12.9.

Scope of delivery:

Valve including seals, without screws and plugs.

Warning:

Please do not forget to order screws and valve plugs.
*our recommendation for use

{{ $t('shop.all.dokumente') }}:

  • Catalogue page Atlas 9 (Page 810) atlas9_seiten/810.pdf
{{ $t('shop.display.artikelgruppe.mehr_informationen') }} {{ $t('shop.display.artikelgruppe.weniger_informationen') }}

{{ $t('shop.display.artikelgruppe.filtern') }}

{{ filter.Eigenschaft.EigenschaftName }}
{{ $t('shop.display.artikelgruppe.kein_eintrag') }}
Way valves NG 6 electically operated in piston design, up to 40 l/min*:
{{ $t('shop.all.artikelgruppe_n_von_m_artikeln', { anzahlArtikelAngezeigt: anzahlArtikelAngezeigt, anzahlArtikelGesamt: anzahlArtikelGesamt} ) }}
{{ $t('shop.all.unverbindliche_richtwerte') }}
Payment options:
{{ $t('shop.all.spaetbestellservice') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.

  • {{ $t(error) }}