Banjo bolt solenoid valve G 1/8"-G 1/8", 2/2-way (normally open), 12 V DC
Item number:
MHO 218 12V=
Item description
Materials:
Banjo bolt and banjo: Nickel-plated brass, internal parts: Brass / stainless steel, seals: FKM/PA/PVC
Temperature range:
-20 to +50 °C
Media:
lubricated and unlubricated, filtered compressed air, neutral gases
Switching time:
< 12 ms
Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages
Voltage tolerance:
± 10 %
Protection class:
IP 65
Structural shape solenoid coil:
U (plug size 1)
Operating recommendations:
Solenoid with "pressure input banjo bolt" are suitable for the assembly on a central compressed air supply, to control a consumer via the banjo. Solenoid valves with "pressure input banjo" can be screwed directly into a consumer (e.g. pneumatic cylinder) via the banjo and supplied with compressed air via the banjo. If a pneumatic cylinder should be controlled, then we recommend installing a NO valve (MHZO...) in one connection and an NC valve (MHZ...) in the other connection.
Advantages:
•economical price,
•compact design
Note:
We recommend ordering an SD 50 silencer separately for the 3/2-directional valves, which can be screwed into the anchor hole..
Information:
These valves are always supplied with a solenoid coil and a connector plug.
Banjo bolt and banjo: Nickel-plated brass, internal parts: Brass / stainless steel, seals: FKM/PA/PVC
Temperature range:
-20 to +50 °C
Media:
lubricated and unlubricated, filtered compressed air, neutral gases
Switching time:
< 12 ms
Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages
Voltage tolerance:
± 10 %
Protection class:
IP 65
Structural shape solenoid coil:
U (plug size 1)
Operating recommendations:
Solenoid with "pressure input banjo bolt" are suitable for the assembly on a central compressed air supply, to control a consumer via the banjo. Solenoid valves with "pressure input banjo" can be screwed directly into a consumer (e.g. pneumatic cylinder) via the banjo and supplied with compressed air via the banjo. If a pneumatic cylinder should be controlled, then we recommend installing a NO valve (MHZO...) in one connection and an NC valve (MHZ...) in the other connection.
Advantages:
•economical price,
•compact design
Note:
We recommend ordering an SD 50 silencer separately for the 3/2-directional valves, which can be screwed into the anchor hole..
Information:
These valves are always supplied with a solenoid coil and a connector plug.
Properties
| Control voltage | 12 V DC |
| Pressure input | Banjo bolt |
| function | 2/2-way (normally open) |
| Banjo bolt Screw in thread | G 1/8" |
| Ring piece female thread | G 1/8" |
| Operating pressure [bar] | 0 - 15 |
| Power consumption (DC) [W] | 6 |
| Spare solenoid coil | MAG U 12V= |
Further information on MHO21812V=
| Weight | 145 g / pcs |
| GTIN | 4050571493172 |
| Customs duty number | 84812090 |
Documents
- Catalogue page Atlas 9 (Page 786) (PDF)
- Data sheet (Print view)
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Accessories
Payment options: