2. Festo Pneumatic
  3. Control technology
  4. Electronic controllers
  5. Controls CECC
  6. OT-FESTO040814

CECC-S (574416) controller

Item number:

OT-FESTO040814

All items of this group
€1,000.04 incl. VAT
pcs
Properties
Cor­ro­sion re­sis­tant class KBK 0 - No cor­ro­sion stress­ing
Per­mis­sion RCM mark,
c UL us - Listed (OL)
Ma­te­r­ial in­for­ma­tion RoHs com­pli­ant
Nom­i­nal op­er­at­ing volt­age DC [V] 24
Op­er­at­ing volt­age 20,4 - 30 V DC
Power input 100 mA nom­i­nal bei 24 V DC
Max. power sup­ply [A] 6,0
am­bi­ent tem­per­a­ture [°C] 0 to 55
Bear­ing tem­per­a­ture [°C] -25 to 70
Rel­a­tive hu­mid­ity 95 %,
Not con­dens­ing
Pro­tec­tion cat­e­gory IP20
Pro­tec­tion class III
In­sen­si­tiv­ity test to vi­bra­tions ac­cord­ing to EN 61131-​2
In­sen­si­tiv­ity test to shock ac­cord­ing to EN 61131-​2
Elec­tri­cal con­nec­tion tech­nol­ogy I/O Bush­ing strip, pitch 3.5 mm
Sta­tus dis­plays LED
CPU data Proces­sor 400 MHz
Dig­i­tal in­puts, quan­tity 12
Dig­i­tal in­puts, switch­ing logic Pos­i­tive logic (PNP)
Dig­i­tal in­puts, quick num­ber in­puts 2, How­ever max. 180 kHz
Dig­i­tal in­puts, input sig­nal delay 3 ms type
Dig­i­tal in­puts, input volt­age / cur­rent 24 V DC
Dig­i­tal in­puts, nom­i­nal value for TRUE >= 15 VDC
Dig­i­tal in­puts, nom­i­nal value for FALSE <= 5 VDC
Dig­i­tal in­puts, po­ten­tial sep­a­ra­tion Yes, opto cou­pler
Dig­i­tal in­puts, sta­tus dis­play LED
Max. line length 30 m Eingänge
Dig­i­tal out­puts, quan­tity 8
Dig­i­tal out­puts, switch­ing logic Pos­i­tive logic (PNP)
Dig­i­tal out­puts, con­tact Tran­sis­tor
Dig­i­tal out­puts, out­put volt­age 24 V DC
Dig­i­tal out­puts, out­put cur­rent 500 mA
Dig­i­tal out­puts, po­ten­tial sep­a­ra­tion Yes, opto cou­pler
Dig­i­tal out­puts, switch­ing fre­quency max. 1 kHz
Dig­i­tal out­puts, short cir­cuit proof yes
Dig­i­tal out­puts, sta­tus dis­play LED
Re­port CANopen,
I-​port,
IO-​Link,
Mod­bus TCP
Field­bus in­ter­face CAN bus
Field­bus in­ter­face, con­nec­tion tech­nol­ogy Sub-D,
9 pin,
Plug
Field­bus in­ter­face, trans­fer rate 125, 250, 500, 800, 1000kbit/s,
can be set via soft­ware
Field­bus in­ter­face, gal­van­i­cally sep­a­rated yes
USB in­ter­face USB 1.1
Eth­er­net, con­nec­tion plug RJ45
Eth­er­net, num­ber 1
Eth­er­net, data trans­fer speed 10/100 Mbit/s
Eth­er­net sup­ported pro­to­cols TCP/IP, EasyIP, Mod­bus TCP
Pro­gram­ming soft­ware CODESYS pro­vided by Festo V3
Pro­gram­ming lan­guage In­struc­tion list (AWL),
Con­tact di­a­gram (KOP),
acc. to IEC 61131-​3,
Se­quence lan­guage,
Func­tion plan,
Struc­tured text
CE cer­tifi­cate (see de­c­la­ra­tion of con­for­mity) to EU EMC di­rec­tive
Cer­ti­fied award­ing point UL E239998-​D1001
Se­r­ial in­ter­face, quan­tity 3
Se­r­ial in­ter­face, type 2 x RS232 / 1 x RS 485-A/422-A
Se­r­ial in­ter­face, con­nec­tion tech­nol­ogy Plug
Se­r­ial in­ter­face, trans­fer rate 300 ... 375000 Bit/s
IO-​Link, re­port De­vice V 1.0,
Mas­ter V 1.1
IO-​Link, com­mu­ni­ca­tion mode con­fig­urable using soft­ware,
De­vice COM1 (4.8 kBaud), COM2 (38.4 kBaud), COM3 (230.4 kBaud),
Mas­ter SIO, COM1 (4.8 kBaud), COM2 (38.4 kBaud), COM3 (230.4 kBaud)
IO-​Link, port type De­vice A,
Mas­ter B
IO-​Link, num­ber of ports De­vice 1,
Mas­ter 1
IO-​Link, process data width OUT Mas­ter pa­ra­me­ter­is­able, 2-32 Byte
IO-​Link, process data width IN Mas­ter pa­ra­me­ter­is­able, 2-32 Byte
IO-​Link, min­i­mum cycle time De­vice 3,2 ms,
Mas­ter 5 ms
IO link, stor­age 2 kByte / port
IO-​Link Mas­ter, out­put cur­rent 3.5 A / port
IO-​Link, con­nec­tion tech­nol­ogy Cage Clamp,
Plug,
De­vice 3 pin,
Mas­ter 5-pin
IO-​Link, com­mu­ni­ca­tion C/Q LED green,
C/Q LED red
IO-​Link, operation-​readiness dis­play L+ LED green on,
L+ LED green off
En­coder in­puts, quan­tity 1
En­coder in­puts, res­o­lu­tion 32 Bit
En­coder in­puts, sig­nal range 5 V dif­fer­en­tial (RS422)
En­coder in­puts, max. input fre­quency [kHz] 1.000
En­coder in­puts, sen­sor sup­ply volt­age 5 V DC (100 mA)
Further information on OT-FESTO040814
Weight 280 g / pcs
GTIN 4052568223076
Customs duty number 85371091
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
deliverable again in ⌀ 5 weeks
Payment options:

Cash on delivery

Invoice