Simply order on the weekend by Sunday at 15:00 h (or if Monday is a public holiday, by Monday at 15:00 h) and you will receive your merchandise within Germany via GLS on the next working day by 12:00 h (charge: 5%, min. € 30,00).
Compact compensator, DN65-PN16 (DIN) (max. 10 bar), EPDM
Item number:
KOMFLK 65
Item description
Version:
Flat corrugated, compression-moulded rubber bellows, highly elastic with synthetic fibre pressure carrier (high-temperature version: steel cord) and wire-reinforced rubber flange collar (self-sealing), swivelling steel flanges on both sides
Equalising capacity:
axial (compression/extension), lateral (lateral offset), angular (angular deviation)
Materials:
Bellows: EPDM (hot water resistant), flange: RSt 37.2 galvanised zinc plated
Temperature range:
-10 to +105 °C (dependent on operating pressure)
Operating pressure:
10 bar (up to +90°C), 8 bar (up to +105°C), burst pressure 45 bar (For intermittent loads, the max. operating pressure must be set 30% lower)
Flat corrugated, compression-moulded rubber bellows, highly elastic with synthetic fibre pressure carrier (high-temperature version: steel cord) and wire-reinforced rubber flange collar (self-sealing), swivelling steel flanges on both sides
Equalising capacity:
axial (compression/extension), lateral (lateral offset), angular (angular deviation)
Materials:
Bellows: EPDM (hot water resistant), flange: RSt 37.2 galvanised zinc plated
Temperature range:
-10 to +105 °C (dependent on operating pressure)
Operating pressure:
10 bar (up to +90°C), 8 bar (up to +105°C), burst pressure 45 bar (For intermittent loads, the max. operating pressure must be set 30% lower)
Properties
| Flange connection | DN65-PN16 (DIN) |
| DN [mm] | 65 |
| Axial compression [mm] | 30 |
| Axial stretching [mm] | 10 |
| Lateral offset [mm] | 13 |
| Angular deviation [°] | 15 |
| L [mm] | 130 |
| B [mm] | 16 |
| D [mm] | 185 |
| Number of holes | 4 |
Further information on KOMFLK65
| Weight | 5 kg / pcs |
| GTIN | 4050571444938 |
| Customs duty number | 40169991 |
| RoHS compliant | Yes |
Documents
- Catalogue page Atlas 9 (Page 450) (PDF)
- Documentation: Elastomer expansion joints (PDF)
- 3D CAD file (volume model) (Only for customers that are logged in) (STP)
- Data sheet (Print view)
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Accessories
Payment options: