Filling spouts for refilling the DSD 500 spray nozzle, suitable for NW 7,2 workshop coupling. For fi
Item number:
DSD 500 FS
Item description
Temperature range:
0 to +40 °C
Operating pressure:
1 to 10 bar
Suitable:
Suitable for all liquids that can be processed with compressed air (except for alkaline or acidic liquids attacking plastics). Can be used in all workshops and industries in which loose goods, such as cutting oil, rust remover, leak detection spray, lubricating and separating agents are used. The inner wall of the spray nozzle is coated and can be filled with air from any commercially available tyre inflator or directly with the optional filling spouts.
0 to +40 °C
Operating pressure:
1 to 10 bar
Suitable:
Suitable for all liquids that can be processed with compressed air (except for alkaline or acidic liquids attacking plastics). Can be used in all workshops and industries in which loose goods, such as cutting oil, rust remover, leak detection spray, lubricating and separating agents are used. The inner wall of the spray nozzle is coated and can be filled with air from any commercially available tyre inflator or directly with the optional filling spouts.
Properties
| Description | Filling spouts for refilling the DSD 500 spray nozzle, suitable for NW 7,2 workshop coupling. For filling with compressed air, the compressed air spray can is simply pressed onto the sockets. |
Further information on DSD500FS
| Weight | 50 g / pcs |
| GTIN | 4050571275013 |
| Customs duty number | 84249020 |
Documents
- Catalogue page Atlas 9 (Page 945) (PDF)
- Data sheet (Print view)
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Payment options: