When you place an order online Monday - Thursday from 16:30 - 21:00, or on Friday from 16:30 - 18:00, we will ship your order on request on the same day by GLS (charge: 5%, min. € 10,00).
FUTURA air units, 2-piece., G 1/4", 0,1 to 2 bar, model series.1
Item number:
CL 14-2 F M AM
Item description
Version:
Self-relieving filter regulator with attached lubricator
Materials:
Body: PA 66 GF60, spring hood: POM, diaphragms and seals: NBR, container: polycarbonate
Temperature range:
-10 to +50 °C
Input pressure:
1.5 - 16 bar (model series 0: 1.5 - 12 bar)
Condensate draining:
semi-automatic**
Pressure gauge connection:
G 1/4" (model series 0: G 1/8")
Pore width in the filter:
5 µm
Erreichbare Druckluftqualität (ISO 8573-1) ohne Verwendung des Ölers:
[6:4:4] (ohne Kältetrockner: [6:7:4])
Media:
Compressed air, neutral gases
Advantages:
•automatic venting if there is overpressure on the secondary side,
•easy assembly of single components within a model series using coupling kits,
•Handwheel can be arrested in place by pressing it down and must be locked with a lock - please use VHS 20. Model series 0 cannot be closed,
•semi-automatic oil filling by connecting a hose at the bottom to the oil bowl (G 1/8"). Through this hose, upon pressing the oil fill button, the oil is sucked into the container (not for model series 0).
Max. condensate amount:
28 cm³
Switch panel thread:
M 36x1,5
Oil metering at 1000 l/min:
approx. 1 - 2 drops/min
Oil supply:
40 cm³
Lubricator reaction limit (at 6 bar):
90 l/min
Scope of delivery:
Air unit, including 50 mm pressure gauge
Flow:
90 to 1750 l/min, secondary relieving: 70 l/min
ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU
Optional:
Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC, Safety version: with upstream lockable ball valve and filler valve -Si
Self-relieving filter regulator with attached lubricator
Materials:
Body: PA 66 GF60, spring hood: POM, diaphragms and seals: NBR, container: polycarbonate
Temperature range:
-10 to +50 °C
Input pressure:
1.5 - 16 bar (model series 0: 1.5 - 12 bar)
Condensate draining:
semi-automatic**
Pressure gauge connection:
G 1/4" (model series 0: G 1/8")
Pore width in the filter:
5 µm
Erreichbare Druckluftqualität (ISO 8573-1) ohne Verwendung des Ölers:
[6:4:4] (ohne Kältetrockner: [6:7:4])
Media:
Compressed air, neutral gases
Advantages:
•automatic venting if there is overpressure on the secondary side,
•easy assembly of single components within a model series using coupling kits,
•Handwheel can be arrested in place by pressing it down and must be locked with a lock - please use VHS 20. Model series 0 cannot be closed,
•semi-automatic oil filling by connecting a hose at the bottom to the oil bowl (G 1/8"). Through this hose, upon pressing the oil fill button, the oil is sucked into the container (not for model series 0).
Max. condensate amount:
28 cm³
Switch panel thread:
M 36x1,5
Oil metering at 1000 l/min:
approx. 1 - 2 drops/min
Oil supply:
40 cm³
Lubricator reaction limit (at 6 bar):
90 l/min
Scope of delivery:
Air unit, including 50 mm pressure gauge
Flow:
90 to 1750 l/min, secondary relieving: 70 l/min
ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU
Optional:
Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC, Safety version: with upstream lockable ball valve and filler valve -Si
Properties
| Version | Air unit |
| Thread | G 1/4" |
| Pressure regulation range [bar] | 0,1 - 2 |
| Container design | Metal bowl with inspection tube |
| Condensate drain | automatic |
| Pressure gauge display [bar] | 0 - 2.5 |
| Mounting brackets | W 1 F |
| Coupling kit | KP 1 F |
| Coupling kit with wall console | KPW 1 F |
| input pressure [bar] | 1,5 - 16 |
Further information on CL14-2FMAM
| GTIN | 4050571236960 |
| Tariff No. | 84811005 |
| RoHS compliant | Yes |
YouTube videos:
Documents
*Standard series, please prefer for use, since the pressure control range is universally usable, **As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Not in stock
Accessories
Payment options: