Glycerine built-in pressure gauge, 3-corner front ring, 63mm 0 to 1,6 bar
Item number:
MFRE 1,663 GLY CR
Item description
Materials:
Housing: 1.4301, measuring system: Cu alloy (pressures > 400 bar: 1.4404, Ø 100: Pressures >= 100 bar: 1.4404), connection: brass, Window: transparent plastic, mounting bracket: Galvanised steel, rear side
Connection thread:
G 1/4" *, back-mounted, centred (Ø 100: G 1/2" *, back-mounted, off-centre)
Class:
1,6 (Ø 100: 1,0)
Temperature range:
-20 to +60 °C
Dial:
1. Scale outside (black), display in bar, 2. scale inside (red), display in PSI
Protection class:
IP 65
Note:
WIKA Type 213.53
Optional:
Connection NPT thread -NPT, ISO factory calibration (following DIN EN 837-1, determination of measurement deviation and hysteresis), DAkkS-DKD calibration (in accordance with DKD-R 6-1, traceable and accredited in accordance with DIN EN ISO/IEC 17025, decision rule 4)
Housing: 1.4301, measuring system: Cu alloy (pressures > 400 bar: 1.4404, Ø 100: Pressures >= 100 bar: 1.4404), connection: brass, Window: transparent plastic, mounting bracket: Galvanised steel, rear side
Connection thread:
G 1/4" *, back-mounted, centred (Ø 100: G 1/2" *, back-mounted, off-centre)
Class:
1,6 (Ø 100: 1,0)
Temperature range:
-20 to +60 °C
Dial:
1. Scale outside (black), display in bar, 2. scale inside (red), display in PSI
Protection class:
IP 65
Note:
WIKA Type 213.53
Optional:
Connection NPT thread -NPT, ISO factory calibration (following DIN EN 837-1, determination of measurement deviation and hysteresis), DAkkS-DKD calibration (in accordance with DKD-R 6-1, traceable and accredited in accordance with DIN EN ISO/IEC 17025, decision rule 4)
Properties
| Diameter [mm] | 63 |
| Connection thread | G 1/4" |
| Display range [bar] | 0 - 1,6 |
| Scale division [bar] | 0,05 |
| Accuracy class | 1,6 |
Further information on MFRE1,663GLYCR
| Weight | 270 g / pcs |
| GTIN | 4050571490294 |
| Customs duty number | 90262040 |
| RoHS compliant | Yes |
| Manufacturer | WIKA (WEEE DE92770372) |
Documents
- Catalogue page Atlas 9 (Page 665) (PDF)
- Documentation (PDF)
- Documentation: Tips for selecting the right pressure gauges (PDF)
- 3D CAD file (volume model) (Only for customers that are logged in) (STP)
- Data sheet (Print view)
*with centring pin for profiled seal
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Accessories
Payment options: