When you place an order online Monday - Thursday from 16:30 - 21:00, or on Friday from 16:30 - 18:00, we will ship your order on request on the same day by GLS (charge: 5%, min. € 10,00).
Hard metal burr 6mm, SPG - shape G - pointed arch / bullet
Item number:
FS SPG 6X18
Item description
Description:
High-quality carbide burrs with cross serration (KVZ 4) for deburring, contour machining, weld seam machining, surface finishing, fettling of high-alloy, rust-, acid- and heat-resistant steels, cast iron and plastics. Recommended cutting speed 300 m/min
Recommended cutting speed (V):
Steel, stainless steel & hard non-ferrous metals: 250 - 350 m/min, soft non-ferrous metals & cast iron: 600 - 900 m/min, plastics: 500 - 1100 m/min (rule of thumb: revolutions = V x 318 / head diameter)
High-quality carbide burrs with cross serration (KVZ 4) for deburring, contour machining, weld seam machining, surface finishing, fettling of high-alloy, rust-, acid- and heat-resistant steels, cast iron and plastics. Recommended cutting speed 300 m/min
Recommended cutting speed (V):
Steel, stainless steel & hard non-ferrous metals: 250 - 350 m/min, soft non-ferrous metals & cast iron: 600 - 900 m/min, plastics: 500 - 1100 m/min (rule of thumb: revolutions = V x 318 / head diameter)
Properties
| Version | SPG - shape G - pointed arch / bullet |
| Head diameter [mm] | 6 |
| Head length [mm] | 18 |
| recommended revolutions (steel, stainless steel & hard non-ferrous metals) [1/min] | 13000 - 19000 |
| recommended revolutions (soft non-ferrous metals & cast iron) [1/min] | 32000 - 48000 |
| recommended revolutions (plastic) [1/min] | 27000 - 58000 |
| Total length [mm] | 58 |
| Shaft diameter [mm] | 6 |
Further information on FSSPG6X18
| Weight | 16 g / pcs |
| GTIN | 4050571309862 |
| Customs duty number | 82077037 |
Documents
- Catalogue page Atlas 9 (Page 990) (PDF)
- Data sheet (Print view)
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Payment options: