HSW-10-AS-SD (540227) handling module

Item number:

OT-FESTO021422

€2,457.56 incl. VAT
pcs
Properties
Work­ing stroke [mm] 9 to 15
size 10
Max. lin­ear stroke at 90° swivel angle 90/90 mm
Z-​stroke [mm] 80 to 100
Damp­en­ing Si­lencer above buffer
in­stal­la­tion po­si­tion ar­bi­trary
Con­struc­tion set up Drive shaft,
Lin­ear guide plus ro­tat­ing bear­ing,
Force con­trolled move­ment cycle
Po­si­tion de­tec­tion For prox­im­ity switch
Re­peata­bil­ity end po­si­tions ±0.02 mm
am­bi­ent tem­per­a­ture [°C] 0 to 60
Max. torque Mx [Nm] 0,6
Max. torque My [Nm] 0,6
Max. torque Mz [Nm] 0,6
Max­i­mum usage load [KGM] 0,5
Max. process force in Y-​direction [N] 30
Fas­ten­ing type With Through­way bore and cen­tring sleeve
Ma­te­r­ial in­for­ma­tion Cop­per and PTFE-​free
Stop­pers ma­te­r­ial High-​alloyed steel
Spring pres­sure piece ma­te­r­ial High-​alloyed steel
Base plate ma­te­r­ial Alu­minium wrought alloy,
an­odized
Bracket ma­te­r­ial Alu­minium wrought alloy,
an­odized
Cross-​guide ma­te­r­ial Quenched and tem­pered steel
Swivel lever ma­te­r­ial Case-​hardening steel,
Bur­nished
Back­grounds ma­te­r­ial Case-​hardening steel,
hard­ened
Sen­sor rail ma­te­r­ial Alu­minium wrought alloy,
an­odized
Bar ma­te­r­ial Alu­minium wrought alloy,
an­odized
Po­si­tion­ing screw ma­te­r­ial High-​alloyed steel
Cover ma­te­r­ial Alu­minium wrought alloy,
an­odized
Max. ac­tu­a­tor torque on drive shaft [Nm] 0,85
Max. axial force on the drive shaft [N] 10
Max. ra­dial force on drive shaft [N] 30
Further information on OT-FESTO021422
Weight 1,9 kg / pcs
GTIN 4052568178789
Customs duty number 84799070
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Not in stock
Payment options:

Cash on delivery

Invoice