LOCTITE 2 component epoxy adhesive, 50 ml Dual cartridge (2:1, A-System)
Item number:
9492/50
Item description
Processing:
A manual dosing gun with a suitable mixer nozzle is required for the double cartridges for precise dosing and component mixing. No manual dosing gun is required for the twin sprayer. Mixer nozzles are not available for this purpose.
Note:
50 ml, 200 ml, and 400 ml double cartridges are supplied together with one mixer nozzle each. For multiple use, we recommend ordering additional mixer nozzles.
A manual dosing gun with a suitable mixer nozzle is required for the double cartridges for precise dosing and component mixing. No manual dosing gun is required for the twin sprayer. Mixer nozzles are not available for this purpose.
Note:
50 ml, 200 ml, and 400 ml double cartridges are supplied together with one mixer nozzle each. For multiple use, we recommend ordering additional mixer nozzles.
Properties
| Packing | 50 ml Dual cartridge (2:1, A-System)* |
| Version | 2 component epoxy adhesive |
| Description | High temperature resistant, universally applicable 2 K epoxy adhesive, with which a wide variety of materials can be bonded and repaired. Resistant to solvents, low outgassing, temperature resistant, electrically insulated and particularly shock resistant. |
| colour | white |
| Temperature range [°C] | max. +180 |
| Processing duration [MIN] | 15 |
| Manual strength [MIN] | 75 |
| fitting mixer nozzles | HPKMD A |
| fitting hand dosing guns | HPK50 |
Danger
Further information on 9492/50
| Weight | 100 g / pcs |
| GTIN | 4050571845223 |
| Customs duty number | 35061000 |
| Manufacturer | Henkel |
Documents
*dispensing gun required
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Payment options: