Simply order on the weekend by Sunday at 15:00 h (or if Monday is a public holiday, by Monday at 15:00 h) and you will receive your merchandise within Germany via GLS on the next working day by 12:00 h (charge: 5%, min. € 30,00).
Item description
Description:
Multi-purpose drill with diamond-cut, sharp cutting edges. Due to the special polishing, as well as the novel coiling, this drill can be used with almost all materials either as a hammer drill or rotating. Annoying changing of drill bits to deal with stone, metal or wood are therefore completely eliminated. Provides a solution to drill holes in tiles or ceramics up to an abrasive hardness of 8!
Suitable:
In the hammer drills and rechargeable battery drilling screws, using drill chucks for the turning and hammering drilling of precise holes in practically all materials used for interior construction. For example: Tiles and ceramic up to abrasive hardness 8, masonry, wood, aluminium, construction steel, lightweight building materials, bricks, plastic, concrete B35.
Multi-purpose drill with diamond-cut, sharp cutting edges. Due to the special polishing, as well as the novel coiling, this drill can be used with almost all materials either as a hammer drill or rotating. Annoying changing of drill bits to deal with stone, metal or wood are therefore completely eliminated. Provides a solution to drill holes in tiles or ceramics up to an abrasive hardness of 8!
Suitable:
In the hammer drills and rechargeable battery drilling screws, using drill chucks for the turning and hammering drilling of precise holes in practically all materials used for interior construction. For example: Tiles and ceramic up to abrasive hardness 8, masonry, wood, aluminium, construction steel, lightweight building materials, bricks, plastic, concrete B35.
Properties
| Version | Single drill |
| Diameter [mm] | 4 |
| Total length [mm] | 75 |
| Operating length [mm] | 40 |
| Shaft diameter [mm] | 3,8 |
Further information on BOHRMC4X75
| Weight | 6,9 g / pcs |
| Customs duty number | 82075060 |
| Manufacturer | Bosch |
Documents
- Catalogue page Atlas 9 (Page 988) (PDF)
- Data sheet (Print view)
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Payment options: