MULTIFIX diaphragm drier, G 1/4", Multifix 1

Name: MULTIFIX diaphragm drier, G 1/4", Multifix 1
Brand: Landefeld
SKU: FMT 14-200
Price: 2256.81 EUR
Availability: InStock

Item number:

FMT 14-200

All items of this group

Exemplary representation: Membrane dryer - Multifix

€2,256.81 incl. VAT

Quantity

pcs

Immediately available

Item description

Materials:
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), seals: NBR, condensate container: die-cast zinc (model series 5: aluminium) or polycarbonate

Temperature range:
-10 to +60 °C

Media:
Compressed air, neutral gases

ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not model series 4)

Advantages:
•Easy assembly of individual components using coupling kits within a model series and thread size.

Note about semi-automatic condensate drain:
As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.

Application:
Diaphragm driers are used to dry compressed air directly at the end point (avoiding condensation). The air must pass through a fine filter before reaching the diaphragm drier. We recommend the following filter combinations for the following scenarios:
Model series 1: Prefilter type F 14 AM + microfilter FX 14 + 2 x coupling kit KP 1
Model series 2: Prefilter type F 12 AM + microfilter FX 12 + 2 x coupling kit KP 2
All diaphragm driers have their own air consumption, which is depending on pressure and size.

Input pressure:
4 to 12 bar

Information:
Painting unit: build your own painting unit from pre and fine filters and diaphragm driers.

Properties

Version	diaphragm drier
Model series	Multifix 1
Thread	G 1/4"
Own air consumption [l/min]	24
max. flow at 13 K pressure condensation point reduction* [l/min]	246
max. flow at 20 K pressure condensation point reduction* [l/min]	176
max. flow at 35 K pressure condensation point reduction* [l/min]	88
max. flow at 45 K pressure condensation point reduction* [l/min]	67
L [mm]	48
Mounting brackets	W 1
Coupling kit	KP 1

Further information on FMT14-200

Weight	850 g / pcs
GTIN	4050571303419
Customs duty number	84213925
RoHS compliant	Yes

Documents

*Example: At a compressed air (not dried) inlet temperature of 25°C, the pressure dew point is 25 °C - 20K = 5°C at a flow rate of 44 l/minute with the type FMT 14-50.

All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.