2. Tlacni regulator – priprava – manometer – termometer – pretok in merjenje stanja polnosti
  3. Naprave za vzdrževanje – Multifix
  4. Membranski sušilnik – Multifix
  5. FMT 14-400

MULTIFIX diaphragm drier, G 1/4", Multifix 1

Item number:

FMT 14-400

All items of this group
€2,674.76 incl. VAT
pcs
Item description
Materials:
 Body: die-cast zinc Z410 (model series 4 & 5: aluminium), seals: NBR, condensate container: die-cast zinc (model series 5: aluminium) or polycarbonate

Temperature range:
 -10 to +60 °C

Media:
 Compressed air, neutral gases

ATEX:
 Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not model series 4)

Advantages:
 •Easy assembly of individual components using coupling kits within a model series and thread size.

Note about semi-automatic condensate drain:
 As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.

Application:
 Diaphragm driers are used to dry compressed air directly at the end point (avoiding condensation). The air must pass through a fine filter before reaching the diaphragm drier. We recommend the following filter combinations for the following scenarios:
Model series 1: Prefilter type F 14 AM + microfilter FX 14 + 2 x coupling kit KP 1
Model series 2: Prefilter type F 12 AM + microfilter FX 12 + 2 x coupling kit KP 2
All diaphragm driers have their own air consumption, which is depending on pressure and size.

Input pressure:
 4 to 12 bar

Information:
 Painting unit: build your own painting unit from pre and fine filters and diaphragm driers.
Properties
Ver­sion di­aphragm drier
Model se­ries Mul­ti­fix 1
Thread G 1/4"
Own air con­sump­tion [l/min] 50
max. flow at 13 K pres­sure con­den­sa­tion point re­duc­tion* [l/min] 460
max. flow at 20 K pres­sure con­den­sa­tion point re­duc­tion* [l/min] 350
max. flow at 35 K pres­sure con­den­sa­tion point re­duc­tion* [l/min] 195
max. flow at 45 K pres­sure con­den­sa­tion point re­duc­tion* [l/min] 150
L [mm] 48
Mount­ing brack­ets W 1
Cou­pling kit KP 1
Further information on FMT14-400
Weight 2,6 kg / pcs
GTIN 4050571303433
Customs duty number 84213925
RoHS compliant Yes
Documents
*Example: At a compressed air (not dried) inlet temperature of 25°C, the pressure dew point is 25 °C - 20K = 5°C at a flow rate of 44 l/minute with the type FMT 14-50.

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available

Accessories

Cou­pling kit - Mulit­fix
11 items
Fix­ing ma­te­r­ial - Mul­ti­fix
14 items
Payment options:

Cash on delivery

Invoice