Data sheet
HGDT-40-A-G2 (540867) Three-point gripper
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO021458
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| size | 40 |
| Stroke per gripper jaw [mm] | 6,0 |
| Max. exchange precision [mm] | <= 0,2 mm |
| Max. angular gripper jaw backlash ax, ay [deg] | <= 0,1 deg |
| Max. gripper jaw play Sz [mm] | <= 0,05 mm |
| Rotational symmetry [mm] | <= 0,2 mm |
| Repeatability grippers [mm] | <= 0,03 mm |
| Quantity Gripper jaws | 3 |
| installation position | arbitrary |
| Principle of operation | double acting |
| Gripper function | 3 point |
| Construction set up |
Inclined plane, Force controlled movement cycle |
| Position detection | For proximity switch |
| Total gripping force, closing, 0.6MPa (6bar, 87 psi) [bar] | 4 to 8 |
| Operating pressure blocking air [bar] | 0 to 0.5 |
| Max. working frequency gripper [Hz] | <= 4 Hz |
| Min. opening time a 6 bar [ms] | 111 |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) [ms] | 87 |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation possible (required in further operations) |
| Information about operating and control medium | 2 - moderate corrosion stress |
| ambient temperature [°C] | 5 to 60 |
| Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) [kg/cm²] | 5,23 |
| Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) [N] | 800 |
| Max. torque on gripper jaws Mx static [Nm] | 30 |
| Max. torque on gripper jaws My static [Nm] | 20 |
| Max. torque on gripper jaws Mz static [Nm] | 25 |
| Lubrication interval guide elements [Mio SP] | 5 |
| Max. mass per external griper finger [g] | 70 |
| Fastening type |
With Throughway bore and dowel pin, With Female thread and dowel pin, Selectively: |
| Pneumatic connection blocking air | M5 |
| Pneumatic connection | M5 |
| Material information | Copper and PTFE-free |
| Cover cap material | High-alloyed stainless steels |
| Housing material |
Aluminium wrought alloy, COMPCOTE coated |
| Gripper jaws material |
hardened, Steel |
| Gripping force safety | When closing |
Further information:
| {{ $t('shop.all.gewicht') }} | 1 kg / pcs |
| {{ $t('shop.all.gtin') }} | 4052568179410 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84798997 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number OT-FESTO021458.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 20.12.2025