For use in gaseous, liquid, viscous and aggressive measured material, in which the medium may not be in contact with the measuring device. The medium is separated from the meter using a diaphragm so that the medium only affects the diaphragm. In order to provide proper use at high temperatures, we require your specific operating conditions for the configuration of the plate spring pressure gauge. Contact our technician for this purpose.

Measuring element / diaphragm: Inconel (< 400 mbar: AISI 316 L), indicator: 1.4571, housing with upper measuring flange: 1.4571, seal: FKM, window: Laminated safety glass

G 1/2" *

100 mm (160 mm for mbar-scale)

5 x scale value (max. 40 bar), violating the lower measurement value is not permitted.

1,6

Environment: -20 do +60 °C, measured material, -20 do +100 °C

IP 54

WIKA Type 432.50

ISO factory calibration (following DIN EN 837-1, determination of measurement deviation and hysteresis), DAkkS-DKD calibration (in accordance with DKD-R 6-1, traceable and accredited in accordance with DIN EN ISO/IEC 17025, decision rule 4)