Data sheet
VSVA-B-P53E-A1-P1 (546745) Basic valve
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO027207
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Valve function | 5/3 vented |
| Actuation type | Electrical |
| Valve size [mm] | 26 |
| Standard nominal flow rate (standardised to DINa1343) [l/min] | 1.000 |
| Operating pressure [bar] | 3 to 10 |
| Construction set up | Piston pusher |
| Reset mode | Mechanical spring |
| Permission | c UL us - Recognized (OL) |
| Protection category |
IP65, NEMA 4 |
| Nominal width [mm] | 9 |
| Exhaust function | Can be throttled |
| Sealing principle | Soft |
| installation position | arbitrary |
| Complies to standard |
ISO 15407-1, VDMA 24563 |
| Control type | pilot operated |
| Control air supply | Internal |
| Flow direction | Not reversible |
| lap | positive Überdeckung |
| Signal condition display | LED |
| lap [l/min] | 1.400 |
| Flow valve single connection plate [l/min] | 1.100 |
| Flow valve pneumatically linked [l/min] | 1.000 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation possible (required in further operations) |
| Oscillation strength | Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Information about operating and control medium [°C] | -5 to 50 |
| Relative humidity | 0 - 90 % |
| Sound pressure level [dB(A)] | 85 |
| control medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| LABS (PWIS) conformity [°C] | -5 to 50 |
| Max. tightening torque Valve fastening [Nm] | 1.8 to 2.2 |
| Fastening type | on connection plate |
| Support air control connection 12 | Connection plate Size 26 mm to ISO 15407-1 |
| Support air control connection 14 | Connection plate Size 26 mm to ISO 15407-1 |
| Exhaust control connection 82/84 |
Recorded, Not recorded to standard |
| Pneumatic connection 1 | Connection plate Size 26 mm to ISO 15407-1 |
| Pneumatic connection 2 | Connection plate Size 26 mm to ISO 15407-1 |
| Pneumatic connection 3 | Connection plate Size 26 mm to ISO 15407-1 |
| Pneumatic connection 4 | Connection plate Size 26 mm to ISO 15407-1 |
| Pneumatic connection 5 | Connection plate Size 26 mm to ISO 15407-1 |
| Pre-control interface | acc. to ISO 15218 |
| Material information | RoHs compliant |
| Seals material |
HNBR, NBR |
| Housing material | Aluminium die casting |
| Screws material | Zinc plated steel |
Further information:
| {{ $t('shop.all.gewicht') }} | 250 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568185077 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84812090 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number OT-FESTO027207.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 20.12.2025