Data sheet
DHEB-8-E-D-E-P (1320787) Bellow gripper
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO030582
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| size | 8 |
| Bellows stroke [mm] | 3,5 |
| Min. diameter to be gripped [mm] | 8,0 |
| Max. diameter to be gripped [mm] | 11,0 |
| installation position | arbitrary |
| Principle of operation |
single action, closed |
| Construction set up |
Contact membrane, Force controlled movement cycle |
| Guide | Base guide |
| Position detection | without |
| Operating pressure [bar] | 5 to 8 |
| reset pressure [bar] | < 1 bar |
| Max. working frequency gripper [Hz] | <= 4 Hz |
| Min. opening time a 6 bar [ms] | 10 |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) [ms] | 30 |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation possible (required in further operations) |
| Information about operating and control medium | 2 - moderate corrosion stress |
| LABS (PWIS) conformity [°C] | 5 to 60 |
| Centre exchange interval for bellows [Mio SP] | 0,5 |
| Guideline payload [KGM] | 0,08 |
| Fastening type |
With Male thread, With locking nut, Selectively: |
| Pneumatic connection | M3 |
| Material information |
LABS containing materials included, RoHs compliant |
| Bellows material | EPDM |
| Material information |
aluminium, anodized |
Further information:
| {{ $t('shop.all.gewicht') }} | 70 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568230074 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84798997 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number OT-FESTO030582.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 20.12.2025