Data sheet

CMMP-AS-C2-3A-M3 (1501325) Motor controller
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO033635
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Fastening type on connection plate,
Permanently screwed
Display Seven segment display
Permission RCM mark,
c UL us - Listed (OL)
CE certificate (see declaration of conformity) to EU EMC directive,
to EU machinery directive,
to EU low voltage directive
UKCA marking (see declaration of conformity) [°C] -25 to 70
ambient temperature [°C] 0 to 40
Relative humidity 0 - 90 %
Protection category IP10,
IP20
Degree of contamination 2
Material information LABS containing materials included,
RoHs compliant
Material information 1-phase
LABS (PWIS) conformity [V] 230
Permitted voltage oscillations ± 10 %
Network frequency [Hz] 50 to 60
Nominal current [A] 2 to 3
Network filter integrated
Max. intermediate circuit voltage DC [V] 320
Braking resistance [Ohm] 60
Impulse power braking resistance [kVA] 2,8
Nominal voltage logic supply DC [V] 24
Permitted range logic voltage ± 20 %
Power input logic supply without parking brake [A] 0,55
Output voltage range AC 3x 0 - 270 V
Nominal output current [A] 2,5
Nominal current per phase, effective [A] 2,5
Peak current per phase, effective [A] 5
Max. peak current duration [s] 5
Nominal performance controller [VA] 500
Peak performance [VA] 1.000
Output frequency [Hz] 0 to 1000
Parameterising interface USB,
Ethernet,
Parameterising and commissioning
Fieldbus coupling CANopen,
DeviceNet,
EtherCAT,
EtherNet/IP,
Modbus/TCP,
PROFINET,
Profibus DP
Communication profile DS301/DSP402,
FHPP
Process coupling I/O coupling,
for 256 mobile sets
Max. fieldbus transfer rate [Mbit/s] 1
Bus connector Sub-D,
9 pin,
Plug
Encoder output interface, properties Resolution 16384 ppr
Encoder output interface, function Actual value feedback via encoder signals for speed control mode,
Target value for downstream switched slave actuator
Encoder input interface, properties EnDat,
HIPERFACE,
RS422,
SINCOS,
3 phase encoder signals
Encoder input interface, function In synchronous mode as a speed preset of the slave actuator,
Encoder signal target speed value
Quantity digital logic inputs 10
Properties logic inputs Freely configurable,
Galvanically separated
Work area logic input [V] 8 to 30
Quantity digital logic outputs 24 V DC 5
Properties digital logic outputs Galvanically separated,
Partially freely configurable
Max. current digital logic outputs [mA] 100
Quantity analogue target value inputs 2
Max. current digital logic outputs Differential inputs,
Configurable for speed,
Configurable for current
Work area target value input ± 10 V
Impedance target value input [kOhm] 20
Quantity analogue monitor outputs 2
Work area monitor outputs ± 10 V
Resolution monitor outputs [Bit] 9
Properties monitor outputs Short circuit proof
Further information:
{{ $t('shop.all.gewicht') }} 2,5 kg / pcs
{{ $t('shop.all.gtin') }} 4052568237899
{{ $t('shop.display.artikel.zollwarennummer') }} 85044085
{{ $t('shop.all.hersteller') }} Festo
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number OT-FESTO033635.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 20.12.2025