Data sheet

DHDS-32-A-NC (1259494) Three-point gripper
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO034002
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
size 32
Stroke per gripper jaw [mm] 3,9
Max. exchange precision [mm] <= 0,2 mm
Max. angular gripper jaw backlash ax, ay [deg] <= 0,2 deg
Max. gripper jaw play Sz [mm] <= 0,02 mm
Rotational symmetry [mm] <= 0,2 mm
Repeatability grippers [mm] <= 0,04 mm
Quantity Gripper jaws 3
installation position arbitrary
Principle of operation double acting
Gripper function 3 point
Construction set up lever,
Force controlled movement cycle
Position detection For proximity switch
Total gripping force, closing, 0.6MPa (6bar, 87 psi) [bar] 4 to 8
Max. working frequency gripper [Hz] <= 4 Hz
Min. opening time a 6 bar [ms] 55
Min. opening time at 0.6 MPa (6 bar, 87 psi) [ms] 47
Min. closing time at 0.6 MPa (6 bar, 87 psi) Compressed air to ISO 8573-1:2010 [7:4:4]
Information about operating and control medium Oiled operation possible (required in further operations)
Information about operating and control medium 1 - low corrosion stress
ambient temperature [°C] 5 to 60
Mass inertia [kg/cm²] 0,820
Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) [N] 150
Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) [Nm] 9
Max. torque on gripper jaws My static [Nm] 9
Max. torque on gripper jaws Mz static [Nm] 9
Lubrication interval guide elements [Mio SP] 10
Max. mass per external griper finger [g] 150
Fastening type With Female thread and dowel pin
Pneumatic connection M5
Material information RoHs compliant
Cover cap material PA
Housing material Aluminium wrought alloy,
Hard anodised
Material information High-alloyed stainless steels
Gripping force safety When closing
Further information:
{{ $t('shop.all.gewicht') }} 370 g / pcs
{{ $t('shop.all.gtin') }} 4052568229313
{{ $t('shop.display.artikel.zollwarennummer') }} 84798997
{{ $t('shop.all.hersteller') }} Festo
Figure
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 20.12.2025