Data sheet
CMSX-P-S-C-U-F1-D-50-A (3929313) Positioner
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO061737
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Construction set up | digital, elektropneumatischer Stellungsregler |
| Principle of operation | double acting |
| Sicherheitsrelevante Konstruktionsmerkmale |
Sicherheitsstellung - pneumatischer Ausgang 4 entlüftet, Sicherheitsstellung - pneumatischer Ausgang 2 betlüftet |
| installation position | arbitrary |
| Fastening type | With Accessories |
| Measurement principle travel measurement system | Potentiometer |
| Display |
LCD-Display, mit Hintergrundbeleuchtung, 7-Segment |
| Setting options | Via display and buttons |
| Size of the dead zone [%] | 0.5 to 10 |
| Operating pressure [bar] | 3 to 8 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation not possible |
| Normal nominal flow [l/min] | 50 |
| Pneumatic connection | G1/8 |
| Information about operating and control medium [V] | 24 |
| Standard nominal flow rate (standardised to DINa1343) [V] | 21.6 to 26.4 |
| Max. power input [mA] | 600 |
| Reverse polarity protection | for operating voltage connections |
| Analogue inputs, signal range |
0 - 10 V, 0 - 20 mA, 4 - 20 mA |
| Analogue inputs, linearity error at 25 °C | 0,5% |
| Analogue inputs, temperature coefficient [%FS/K] | < 0,02 %FS/K |
| Analogue inputs, resolution | 16 bit |
| Analogue inputs, max. dynamic range | yes |
| Analogue inputs, electrical isolation | no |
| Analogue inputs, temperature coefficient | 4 - 20 mA |
| Analogue outputs, max. load resistance [Ohm] | <= 600 Ohm |
| Analog inputs, overload protection | 0,5% |
| Analogue inputs, electrical isolation [%FS/K] | < 0,02 %FS/K |
| Analogue outputs, resolution | 12 bit |
| Analogue outputs, max. load resistance | yes |
| Analog outputs, short circuit current rating | yes |
| Analogue outputs, temperature coefficient | yes |
| Analogue outputs, galvanic isolation | no |
| Analogue outputs, reverse polarity protection | to IEC 61131-2 type 3 |
| Analog outputs, short circuit current rating |
PNP, NPN |
| Analog outputs, overload protection | yes |
| Analogue outputs, galvanic isolation | Yes, opto coupler |
| Digital outputs, reverse polarity protection | yes |
| Control output | 3 x PNP oder 3 x NPN umschaltbar |
| Digital inputs, reverse polarity protection | 100 mA |
| Digital outputs, short circuit proof | yes |
| Digital outputs, reverse polarity protection | yes |
| Digital outputs, potential separation | Yes, opto coupler |
| Electrical connection 1, function |
Spannungsversorgung, Analogausgang, Analogeingang, 2x Digitaleingang, 3x Digitalausgang, Spannungsversorgung Last |
| Digital outputs, short circuit current rating | Multi tube holder |
| Digital outputs, overload protection | Screw clamp |
| Electrical connection 1, number of pins / wires | 14 |
| Electrical connection 1, tightening torque [Nm] | 0,6 |
| Electrical connection 1, conductor cross section [mm²] | < 1,5 mm2 |
| Cable screwing | M20x1,5 elektrischer Anschluss 1 |
| Permitted cable diameter | 7 - 13 mm elektrischer Anschluss 1 |
| Electrical connection 1, tightening torque | 30 m für elektrischer Anschluss 1 |
| Electrical connection 1, conductor cross section [°C] | -5 to 60 |
| Bearing temperature [°C] | -20 to 60 |
| Relative humidity | 93 % |
| Protection category | IP65 |
| Shock resistance |
Schockprüfung mit Schärfegrad 1 nach FN 942017-5 und EN 60068-2-27, gemäß EN 60068-2-29 |
| Oscillation strength |
Transporteinsatzprüfung mit Schärfegrad 2 nach FN 942017-4 und EN 60068-2-6, gemäß EN 60068-2-6 |
| Degree of contamination | 3 |
| Permission | RCM mark |
| CE certificate (see declaration of conformity) |
acc. to EU-EMV Directive, acc. to EU-RoHS Directive |
| Housing material | PC reinforced |
| Window material | PC |
| Base plate material |
Aluminium wrought alloy, anodized |
| Shaft material | High-alloyed stainless steels |
| Coupling material | High-alloyed stainless steels |
| UKCA marking (see declaration of conformity) | High-alloyed stainless steels |
| Seals material | NBR |
| Cable connection material | PA |
| Blind stopper material | PA |
| Material information | RoHs compliant |
| Dimensions W x L x H | 190 mm x 105 mm x 130 mm |
Further information:
| {{ $t('shop.all.gewicht') }} | 1,3 kg / pcs |
| {{ $t('shop.all.gtin') }} | 4052568273750 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 90328100 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number OT-FESTO061737.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 20.12.2025