Data sheet
VOFC-LT-M32C-MC-FGP14-F19 (4514744) Valve
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO070742
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Valve function | 3/2 closed monostable |
| Actuation type | Electrical |
| Build.width [mm] | 51 |
| Standard nominal flow rate (standardised to DINa1343) [l/min] | 766 |
| Operating pressure [bar] | 1 to 8 |
| Construction set up | Pre-controlled piston poppet valve |
| Reset mode | Mechanical spring |
| Protection category | IP65 |
| Certified awarding point | TÜV V496.01/16 |
| Nominal width [mm] | 6 |
| Sealing principle | Hard |
| installation position | arbitrary |
| Hand assist actuation | none |
| Control type | pilot operated |
| Control air supply |
external, Internal |
| Flow direction | Not reversible |
| Safety function | Safe venting |
| Safety Integrity Level (SIL) |
up to SIL 3 Low Demand mode, Product can be used in SRP/CS up to SIL 3 High Demand |
| Flow Kv venting [m³/h] | 0,50 |
| Flow Kv venting [m³/h] | 0,65 |
| Normal nominal flow 2-3 [l/min] | 1.467 |
| Shifting time off [ms] | 18 |
| Shifting time on [ms] | 24 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] |
| Corrosion resistant class KBK | 4 - particularly severe corrosion stress |
| Medium temperature [°C] | -25 to 60 |
| ambient temperature [°C] | -25 to 60 |
| Pneumatic connection 1 |
M5, NAMUR wiring diagram |
| LABS (PWIS) conformity |
NAMUR wiring diagram, Flange 1/4 |
| Pneumatic connection 3 | G1/4 |
| Material information |
LABS containing materials included, RoHs compliant |
| Seals material | NBR |
| Housing material | Aluminium ematal coated |
| Information about operating pressure | 0 - 8 bar for external control air |
Further information:
| {{ $t('shop.all.gewicht') }} | 650 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568274726 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84812090 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number OT-FESTO070742.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 20.12.2025