Data sheet
Pressure gauge, horizontal, 80mm, 0 to 1 bar
Item number:
MW 180
Example illustration
Item description
Materials:
Housing: black plastic, measuring system and connection: Cu alloy, window: transparent plastic, (Ø 100: housing: black steel, measuring system and connection: Cu-alloy, window: transparent plastic)
Connection thread:
G 1/4" **, rear side centrical
Class:
2,5
Temperature range:
-20 to +60 °C
Version:
with red marking indicator
Protection class:
IP 42
Note:
WIKA Type 111.12
Optional:
ISO factory calibration (following DIN EN 837-1, determination of measurement deviation and hysteresis), DAkkS-DKD calibration (in accordance with DKD-R 6-1, traceable and accredited in accordance with DIN EN ISO/IEC 17025, decision rule 4)
Properties
| Diameter [mm] | 80 |
| Display range [bar] | 0 - 1 |
| Scale division [bar] | 0,02 |
Further information:
| Weight | 140 g / pcs |
| GTIN | 4050571512521 |
| Customs duty number | 90262040 |
| RoHS compliant | Yes |
| Manufacturer | WIKA (WEEE DE92770372) |
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number MW 180.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 15.05.2025