Data sheet
CPX-E-PB (4080496) Bus module
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO072235
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Dimensions W x L x H | 42.2 mm x 125.8 mm x 76.5 mm |
| Pitch dimension [mm] | 18,9 |
| Diagnosis via LED |
Force mode, Bus error, Voltage supply electronics/sensors, Voltage supply load, System error |
| Diagnosis via bus |
Under-voltage, required function not supported, Wire break, Short circuit, not ready for data exchange, Parametering error, Buffer overflow, upper limit value not held, Transmission error, lower limit value not maintained, Watchdog/IO Status |
| Module parameter |
Diagnosis under-voltage, Process value display analogue modules |
| Voltage supply, connection type | Multi tube holder |
| Voltage supply, connection technology | Spring tension clamp |
| Voltage supply, number of poles/wires | 4 |
| Voltage supply, conductor cross-section [mm²] | 0.2 to 1.5 |
| Voltage supply, information on conductor cross-section | 0.2 - 2.5 mm² for flexible conductor without wire end sleeve |
| Permission | RCM mark |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Oscillation strength | Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistant class KBK | 0 - No corrosion stressing |
| Bearing temperature [°C] | -20 to 70 |
| Relative humidity |
95 %, Not condensing |
| Protect against direct and indirect contact | Funktionskleinspannung mit sicherer Trennung (PELV) |
| Protection category | IP20 |
| ambient temperature [°C] | -5 to 50 |
| Information about ambient temperature | -5 - 60 °C with vertical installation |
| Max. address volume outputs [Byte] | 64 |
| Fastening type | With Slot rail |
| Material information |
LABS containing materials included, RoHs compliant |
| Housing material | PA |
| Intrinsic power input operating voltage electronics/sensors | Type 75 mA |
| Nominal operating voltage DC electronics / sensor [V] | 24 |
| Permitted voltage oscillations electronics/sensors | ± 25 % |
| Max. address volume inputs [Byte] | 64 |
| Power blackout bridging [ms] | 20 |
| Configuration support | GSD file |
| Max. number of modules | 10 |
| System parameter |
Force mode, Diagnosis memory, Failsafe reaction, System start |
| Weight | DIL switch |
| Max. power supply [A] | 8 |
| Voltage supply, function | Electronics and sensors |
| Information about outputs |
62 Byte mit E/A-Diagnose-Interface, 64 Byte ohne Diagnose, 64 Byte mit Statusbits |
| Information out inputs |
62 byte with I/O diagnosis interface, 63 byte with status bits, 64 byte without diagnosis |
| Fieldbus interface, galvanically separated | yes |
| Fieldbus interface, transfer rate |
9.6 kbit/s, 19.2 kbit/s, 93.75 kbit/s, 187.5 kbit/s, 500 kbit/s, 1.5 Mbit/s, 3 Mbit/s, 6 Mbit/s, 12 Mbit/s |
| Fieldbus interface | PROFIBUS |
| Fieldbus interface, connection type | socket / container / …. |
| Fieldbus interface, connection technology | Sub-D |
| Fieldbus interface, number of pins / wires | 9 |
| Fieldbus interface, report | PROFIBUS DP |
| Fieldbus interface, max. address volume for inputs [Byte] | 64 |
| Fieldbus interface, max. address volume for outputs [Byte] | 64 |
| Service interface, function | Diagnosis and parametrisation |
| Service interface, connection type | socket / container / …. |
| Service interface, connection technology | USB 2.0 type B mini |
| Service interface, number of pins / wires | 5 |
| Fieldbus interface information |
optional connection technology with accessories:, plug/socket M12x1 B-coded, 5-pin, Protection Class IP65 |
Further information:
| {{ $t('shop.all.gewicht') }} | 220 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568291167 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 85176200 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number OT-FESTO072235.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 20.12.2025