Data sheet

CTMM-S1-D-8E-M8-3 (8047505) Input module
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO072629
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Dimensions W x L x H 27 mm x 123 mm x 40 mm
Pitch dimension [mm] 28
Quantity outputs: 0
Quantity inputs 8
Diagnosis via LED Error per module,
Status per channel
Input debouncing time 0.1 ms
Fuse (short circuit) Internal electronic fuse
Intrinsic power input operating voltage electronics/sensors typically 12 mA
Nominal operating voltage DC electronics / sensor [V] 24
Nominal operating voltage DC [V] 24
Potential separation channel - internal bus no
LABS (PWIS) conformity no
Switch level Signal 0: <= 5 V,
Signal 1: >= 11 V
Material information ± 25 %
CE certificate (see declaration of conformity) to EU EMC directive
Oscillation strength Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistant class KBK 2 - moderate corrosion stress
Bearing temperature [°C] -20 to 40
Medium temperature [°C] -5 to 50
Protection category IP65,
IP67
ambient temperature [°C] -5 to 50
Characteristic curves inputs to IEC 61131-2 type 3
Max. line length 30 m
Switching logic inputs PNP (Positive switching)
Electrical connection: input, function Digital input
Electrical connection: input, connection type 8x socket
Electrical connection: input, connection technology M8x1 A coded to EN 61076-2-104
Electrical connection: input, number of pins / wires 3
Material information RoHs compliant
Housing material PA reinforced
Further information:
{{ $t('shop.all.gewicht') }} 95 g / pcs
{{ $t('shop.all.gtin') }} 4052568435288
{{ $t('shop.display.artikel.zollwarennummer') }} 85389099
{{ $t('shop.all.hersteller') }} Festo
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number OT-FESTO072629.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 20.12.2025