Data sheet

EHPS-16-A (8070832) Parallel gripper
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO081195
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
size 16
Stroke per gripper jaw [mm] 10
Max. exchange precision [mm] <= 0,2 mm
Max. gripper jaw play ax, ay [deg] 0,4
Max. gripper jaw play Sz [mm] 0,05
Rotational symmetry [mm] <= 0,2 mm
Repeatability grippers [mm] <= 0,03 mm
Quantity Gripper jaws 2
installation position arbitrary
Gripper function Parallel
Construction set up T-Form,
Zahnstange/Ritzel,
Schneckengetriebe,
elektrischer Greifer
Complies to standard IEC 61010-1
Guide sliding guide
Position detection For proximity switch
Motor type DC servomotor
Operating element Rastschalter
Operation-readiness display LED
Max. cycle frequency [Hz] 1,1
Max. power input [mA] 1.000
Nominal operating voltage DC [V] 24
Permitted voltage oscillations ± 10 %
Permission RCM mark
KC-mark KC-EMV
CE certificate (see declaration of conformity) acc. to EU-EMV Directive,
acc. to EU-RoHS Directive
Corrosion resistant class KBK 1 - low corrosion stress
Sound pressure level [dB(A)] <= 70 dB(A)
Protection category IP40
ambient temperature [°C] 5 to 60
Mass inertia [kg/cm²] 0,78
Max. force on gripper jaws Fz static [N] 200
Max. torque on gripper jaws Mx static [Nm] 7
Max. torque on gripper jaws My static [Nm] 4,4
Max. torque on gripper jaws Mz static [Nm] 7
Lubrication interval guide elements [Mio SP] 2
Max. mass per external griper finger [g] 100
Electrical connection M12x1,
5-polig,
Kabel mit Stecker
Fastening type Selectively:,
Female thread and centring sleeve,
With Throughway bore and centring sleeve
Material information RoHs compliant
Housing material Anodised aluminium
Gripper jaws material High-alloyed stainless steels
Further information:
{{ $t('shop.all.gewicht') }} 480 g / pcs
{{ $t('shop.all.gtin') }} 4052568445768
{{ $t('shop.display.artikel.zollwarennummer') }} 84798997
{{ $t('shop.all.hersteller') }} Festo
Figure
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 21.12.2025