Data sheet
SMEO-1-LED-230-K5-B (160998) Proximity sensor
{{ $t('shop.all.artikelnummer') }}:
OT-FESTO003651
Example illustration
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Design | Block structure |
| Material information | Copper and PTFE-free |
| Measurement principle | Reed magnetic |
| ambient temperature [°C] | -20 to 70 |
| Control output | Bipolar contact |
| Switching element function | NO contact |
| Reproducibility of the switching value | ± 0,1 mm |
| Switch on time [ms] | 0,5 |
| Max. switching capacity AC [VA] | 40 |
| Max. switching capacity DC [W] | 40 |
| Short circuit resistance | no |
| Overload resistant | Not available |
| Operating voltage range DC [V] | 5 to 200 |
| Reverse polarity protection | no |
| Electrical connection |
2-wire, cable |
| Fastening type | With Accessories |
| Housing material |
PC, PET, TPE-O, Steel, Zinc pressure cast, Epoxy resin |
| Ambient temperature for moving cable placements [°C] | -5 to 70 |
| Protection category | IP67 |
| Permission | RCM mark |
| CE certificate (see declaration of conformity) |
to EU EMC directive, to EU low voltage directive |
| Operating voltage range AC [V] | 5 to 250 |
| Switching status indicator | LED yellow |
| Complies to standard | EN 60947-5-2 |
| Switch off time [ms] | 0,03 |
| Max. switching frequency [Hz] | 500 |
| Max. output current AC [mA] | 250 |
| Max. output current DC [mA] | 120 |
| Voltage drop [V] | <= 4,5 V |
| Residual current [mA] | 0 |
| Connection outlet direction | along |
| Cable length [MTR] | 5,0 |
| Cable sleeve material | PVC |
| Torque [Nm] | 2,9 |
| Surge voltage strength [kV] | 4 |
| Degree of contamination | 3 |
Further information:
| {{ $t('shop.all.gewicht') }} | 150 g / pcs |
| {{ $t('shop.all.gtin') }} | 4052568128333 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 85365080 |
| {{ $t('shop.all.hersteller') }} | Festo |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number OT-FESTO003651.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 20.12.2025