Item group

Ball valves with electric rotary actuators (industrial version), up to 40 bar

Exemplary representation: Brass ball valve with electric quarter-turn actuator

Advantages:

•2 additional limit switches,
•Torque cut-off,
•Variable voltage (DC or AC),
•Manual override,
•Heater integrated in actuator housing,
•Construction according to DIN 3202-M3 and DVGW certified (PN 5 / MOP 5) for G 1/2" - G 2"

Ball valve

Materials:

Housing: nickel-plated brass, ball: hard chromium plated brass, seal: PTFE / FKM

Temperature range:

-20°C up to max. +160°C (G 2-1/2" - G 3": max. +120°C), Gas: -20°C to max. +60°C)

Media:

Water, compressed air, vacuum (max. -0.9 bar), oils, fuels, heating oil, solvents, colours, paints, weak acids and alkalis

Rotary actuator

Description:

Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!

Materials:

housing: PA 6

Temperature range:

-20°C to +70°C

Voltage:

24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)

Protection class:

IP 67 (version with actuating time 140 sec: IP 65)

Power-on time:

75%

Optional:

Regulating time 140 sec. (only for drive size 2, 85 - 240V AC/DC or special design 24V AC/DC: KH...ELI 24-140) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS

Warning:

In case of high media temperatures, the actuator must be cooled if necessary!

{{ $t('shop.all.dokumente') }}:

  • Catalogue page Atlas 9 (Page 538) atlas9_seiten/538.pdf
    Documentation: electrically actuated ball valves doku/kheli.pdf
    Function and structure of an electrical ball valve
    Secure electrically operated ball valves with the BSR system!
{{ $t('shop.display.artikelgruppe.mehr_informationen') }} {{ $t('shop.display.artikelgruppe.weniger_informationen') }}

{{ $t('shop.display.artikelgruppe.filtern') }}

{{ filter.Eigenschaft.EigenschaftName }}
{{ $t('shop.display.artikelgruppe.kein_eintrag') }}
Ball valves with electric rotary actuators (industrial version), up to 40 bar:
{{ $t('shop.all.artikelgruppe_n_von_m_artikeln', { anzahlArtikelAngezeigt: anzahlArtikelAngezeigt, anzahlArtikelGesamt: anzahlArtikelGesamt} ) }}
{{ $t('shop.all.unverbindliche_richtwerte') }}
Payment options:
{{ $t('shop.all.spaetbestellservice') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.

  • {{ $t(error) }}