Item group
Cone countersinks / deburrer countersinks 90°, DIN 335
Description:
3 cut, right cutting countersink, form C 90°, radial undercut, for burr-free and zero chatter counter sinking, deburring and sinking. Best results with low cutting speed, good centring, good centring and chip removal. For countersinking according to DIN 74 and DIN 75.
Qualities:
HSS-G:
Use for steel, cast steel alloyed and unalloyed (<900 N/mm² tensile strength), grey, malleable, nodular and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass, bronze and plastics.
HSS-G Co 5 (HSS-E):
Use for steel, cast steel alloyed and unalloyed (<1100 N/mm² tensile strength), grey, malleable, nodular and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass, bronze and plastics. Can also be used for hot and cold work steels, as well as rust and acid resistant steels (stainless steels V2A / V4A).
Documents:
More information
Filter items
more filters
Cone countersinks / deburrer countersinks 90°, DIN 335:
16 of 16 articles 
BOHR KS 6,3 HSS
HSS-G countersink 90°, DIN 335, 1,5 - 6,3 mm
€13.76
incl. VAT
BOHR KS 8,3 HSS
HSS-G countersink 90°, DIN 335, 2,0 - 8,3 mm
€16.03
incl. VAT
BOHR KS 10,4 HSS
HSS-G countersink 90°, DIN 335, 2,5 - 10,4 mm
€18.15
incl. VAT
BOHR KS 12,4 HSS
HSS-G countersink 90°, DIN 335, 2,8 - 12,4 mm
€19.59
incl. VAT
BOHR KS 16,5 HSS
HSS-G countersink 90°, DIN 335, 3,2 - 16,5 mm
€21.06
incl. VAT
BOHR KS 20,5 HSS
HSS-G countersink 90°, DIN 335, 3,5 - 20,5 mm
€28.06
incl. VAT
BOHR KS 25 HSS
HSS-G countersink 90°, DIN 335, 3,8 - 25,0 mm
€38.47
incl. VAT
BOHR KS SET HSS
Kegelsenkerset, 6 tlg. HSS
€119.96
incl. VAT
BOHR KS 6,3 HSSCO
HSS-G Co 5 countersink 90°, DIN 335, 1,5 - 6,3 mm
€18.42
incl. VAT
BOHR KS 8,3 HSSCO
HSS-G Co 5 countersink 90°, DIN 335, 2,0 - 8,3 mm
€21.42
incl. VAT
BOHR KS 10,4HSSCO
HSS-G Co 5 countersink 90°, DIN 335, 2,5 - 10,4 mm
€24.53
incl. VAT
BOHR KS 12,4HSSCO
HSS-G Co 5 countersink 90°, DIN 335, 2,8 - 12,4 mm
€26.95
incl. VAT
BOHR KS 16,5HSSCO
HSS-G Co 5 countersink 90°, DIN 335, 3,2 - 16,5 mm
€31.80
incl. VAT
BOHR KS 20,5HSSCO
HSS-G Co 5 countersink 90°, DIN 335, 3,5 - 20,5 mm
€46.26
incl. VAT
BOHR KS 25 HSSCO
HSS-G Co 5 countersink 90°, DIN 335, 3,8 - 25,0 mm
€64.03
incl. VAT
BOHR KS SET HSSCO
Kegelsenkerset, 6 tlg. HSS Co5 (HSS-E)
€188.12
incl. VAT
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Payment options: