Universal display, monitoring and regulation device

Description

Materials:
Housing and window: polycarbonate

Temperature range:
-20°C bis +50°C

Protection class:
front side: IP 65

Input signals:
Standard signals (0-20 mA, 4-20 mA, 0-50 mV, 0-1V, 0-2V and 0-10V), resistor thermometers (Pt100 and Pt1000), thermocouples (types K, J, N, T, S, R, B, E and L), frequency / speed (TTL and switch contact)

Outlets:
2 switch contacts (not galvanised isolated, PNP, NPN or push-pull)

Output functions:
2 point, 3 point, 2 point with alarm, min / max alarm together or separated, switch points user defined

Conversion rate:
Standard signal and frequency measurement: approx. 100 measurements/sec., temperature measurement: approx. 1 measurement per second

Display accuracy:
± 0.2% of the span for voltage signals

Power supply:
9 - 28 V DC

Display:
four-digit, red LED display, character height: 10 mm

Dimensions:
front frame: 24 x 48 mm, installation depth (with plug-in terminal): approx. 67 mm

Universal display, monitoring and regulation device: 1 of 1 items

Universal built-in display and controller
  • Description

    Digital display for installation into a panel cut-out 22.4 x 45.3 mm

Immediately available

287,36 €

All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.