Item description
Materials:
Body: Aluminium anodised and galvanised steel, seals: NBR
Temperature range:
-10 to +70 °C
Operating pressure:
1 to 16 bar
Pressure regulation range:
1 to 8 bar
Media:
oiled and unlubricated, filtered compressed air, neutral and non-hazardous gases
Function:
•In many applications, the working pressure is only required in one direction. Consequently, significant air can be saved by reducing the reset pressure.
•The configured pressure also remains constant when the input pressure drops.
•If the primary pressure builds up from the thread side, the configured pressure will escape on the connection side. The compressed air can flow through a bypass in the opposing direction without a throttle. The pressure regulator can also be inserted behind a valve.
Body: Aluminium anodised and galvanised steel, seals: NBR
Temperature range:
-10 to +70 °C
Operating pressure:
1 to 16 bar
Pressure regulation range:
1 to 8 bar
Media:
oiled and unlubricated, filtered compressed air, neutral and non-hazardous gases
Function:
•In many applications, the working pressure is only required in one direction. Consequently, significant air can be saved by reducing the reset pressure.
•The configured pressure also remains constant when the input pressure drops.
•If the primary pressure builds up from the thread side, the configured pressure will escape on the connection side. The compressed air can flow through a bypass in the opposing direction without a throttle. The pressure regulator can also be inserted behind a valve.
Properties
| Banjo design | Hose screw connection |
| Screw-in thread P | R 1/4" |
| Ring piece hose diameter (outer x inner) A [mm] | 10x8 |
Further information on RSV14/RS8
| Weight | 105 g / pcs |
| GTIN | 4050571605841 |
| Customs duty number | 84812090 |
Documents
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Accessories
Payment options: