Haga su pedido simplemente durante el fin de semana hasta los domingos a las 15 hs (o cuando el lunes es feriado, los lunes hasta las 15:00 hs) y reciba su mercancía dentro de Alemania por GLS el próximo día hábil antes de las 12 hs (tarifa: 5%, min. 30,00 €).
CMMO-ST-C5-1-LKP (1512320) motor controller
Número de artículo:
OT-FESTO057263
Propiedades
| Fastening type |
on connection plate, With Slot rail, Permanently screwed |
| Display |
Seven segment display, LED green / red |
| Permission |
RCM mark, c UL us - Listed (OL) |
| KC-mark | KC-EMV |
| CE certificate (see declaration of conformity) |
to EU EMC directive, to EU machinery directive |
| Bearing temperature [°C] | -25 to 75 |
| ambient temperature [°C] | 0 to 50 |
| UL - ambient temperature [°C] | 0 to 40 |
| Relative humidity |
0 - 90 %, Not condensing |
| Protection category | IP40 |
| Material information | RoHs compliant |
| Nominal current load supply [A] | 6 |
| Peak current load supply [A] | 8 |
| Network filter | integrated |
| Nominal voltage load supply DC [V] | 24 |
| Max. intermediate circuit voltage DC [V] | 31 |
| Braking resistance [Ohm] | 15 |
| Impulse power braking resistance [kVA] | 0,1 |
| Nominal voltage logic supply DC [V] | 24 |
| Permitted range logic voltage | ± 15 % |
| Nominal current logic supply [A] | 0,3 |
| Nominal output current [A] | 5,7 |
| Operating mode controller |
PWN, MOSFET power end level, P position controller, Cascade controller with, PI speed controller, Proportional and integral controller for current |
| Adjustable current lowering | Via software |
| Step setting | Via software |
| Protection function |
I²t monitoring, Drag error monitoring, Software endpoint detection, Voltage blackout detection, Current monitoring, Temperature monitoring |
| Nominal current setting | Via software |
| Parameterising interface | Ethernet |
| Ethernet supported protocols | TCP/IP, Modbus TCP |
| Rotor position transducer | Encoder |
| Position transducer | Encoder |
| Encoder input interface, properties | RS422 |
| Quantity digital logic inputs | 1 |
| Switching logic inputs | PNP (Positive switching) |
| Properties logic inputs | Galvanically connected with logic potential |
| Logic input specification | Depending on IEC 61131-2 |
| Work area logic input [V] | 24 |
| Quantity digital logic outputs 24 V DC | 3 |
| Switching logic outputs | PNP (Positive switching) |
| Properties digital logic outputs |
Partially freely configurable, Not galvanically separated |
| Max. current digital logic outputs [mA] | 100 |
| Safety function | Safe switched off torque (STO) |
| Safety Integrity Level (SIL) | Safe switched off torque (STO) / SIL 3 |
| Performance Level (PL) | Safe Torque off (STO) / category 3, Performance Level e |
| Report |
FHPP, I-port, IO-Link, Modbus TCP |
| Fieldbus coupling | Ethernet |
| Communication profile | FHPP |
| IO-Link, connection technology | Cage Clamp |
| IO-Link, report | Device V 1.1 |
| IO-Link, communication mode | COM3 (230.4 kBaud) |
| IO-Link, number of ports | Device 1 |
| IO-Link, process data width OUT | Parameterisable 8 or 16 Bytes |
| IO-Link, process data contents OUT | Parameterisable FHPP or FHPP+FPC |
| IO-Link, process data width IN | Parameterisable 8 or 16 Bytes |
| IO-Link, process data contents IN | Parameterisable FHPP or FHPP+FPC |
| IO-Link, minimum cycle time | 1 ms |
Más información sobre OT-FESTO057263
| Peso | 390 g / Udad |
| GTIN | 4052568263553 |
| Código aduanero | 85044085 |
| Fabricante | Festo |
documentos
- Dokumentacijo (slovene) (english) (PDF)
- Hoja de datos (Vista de impresión)
- Hoja de datos (Inglés) (Vista de impresión)
¡Todas las indicaciones se entienden como valores de referencia no vinculantes! No asumimos ninguna responsabilidad por la elección de datos no confirmada por escrito. Las indicaciones de presión se refieren, salvo indicación en contrario, a líquidos del grupo II a +20°C
Medios de pago: