CPX-E-PB (4080496) bus module

Número de artículo:

OT-FESTO072235

470,75 € incl. 19 % IVA
Udad
Propiedades
Dimensions W x L x H 42.2 mm x 125.8 mm x 76.5 mm
Pitch dimension [mm] 18,9
Diagnosis via LED Force mode,
Bus error,
Voltage supply electronics/sensors,
Voltage supply load,
System error
Diagnosis via bus Under-voltage,
required function not supported,
Wire break,
Short circuit,
not ready for data exchange,
Parametering error,
Buffer overflow,
upper limit value not held,
Transmission error,
lower limit value not maintained,
Watchdog/IO Status
Module parameter Diagnosis under-voltage,
Process value display analogue modules
Voltage supply, connection type Multi tube holder
Voltage supply, connection technology Spring tension clamp
Voltage supply, number of poles/wires 4
Voltage supply, conductor cross-section [mm²] 0.2 to 1.5
Voltage supply, information on conductor cross-section 0.2 - 2.5 mm² for flexible conductor without wire end sleeve
Permission RCM mark
CE certificate (see declaration of conformity) to EU EMC directive
Oscillation strength Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27
Corrosion resistant class KBK 0 - No corrosion stressing
Bearing temperature [°C] -20 to 70
Relative humidity 95 %,
Not condensing
Protect against direct and indirect contact Funktionskleinspannung mit sicherer Trennung (PELV)
Protection category IP20
ambient temperature [°C] -5 to 50
Information about ambient temperature -5 - 60 °C with vertical installation
Max. address volume outputs [Byte] 64
Fastening type With Slot rail
Material information LABS containing materials included,
RoHs compliant
Housing material PA
Intrinsic power input operating voltage electronics/sensors Type 75 mA
Nominal operating voltage DC electronics / sensor [V] 24
Permitted voltage oscillations electronics/sensors ± 25 %
Max. address volume inputs [Byte] 64
Power blackout bridging [ms] 20
Configuration support GSD file
Max. number of modules 10
System parameter Force mode,
Diagnosis memory,
Failsafe reaction,
System start
Weight DIL switch
Max. power supply [A] 8
Voltage supply, function Electronics and sensors
Information about outputs 62 Byte mit E/A-Diagnose-Interface,
64 Byte ohne Diagnose,
64 Byte mit Statusbits
Information out inputs 62 byte with I/O diagnosis interface,
63 byte with status bits,
64 byte without diagnosis
Fieldbus interface, galvanically separated yes
Fieldbus interface, transfer rate 9.6 kbit/s,
19.2 kbit/s,
93.75 kbit/s,
187.5 kbit/s,
500 kbit/s,
1.5 Mbit/s,
3 Mbit/s,
6 Mbit/s,
12 Mbit/s
Fieldbus interface Profibus
Fieldbus interface, connection type socket / container / ….
Fieldbus interface, connection technology Sub-D
Fieldbus interface, number of pins / wires 9
Fieldbus interface, report Profibus DP
Feldbus-Schnittstelle, Max. Adressvolumen Eingänge [Byte] 64
Feldbus-Schnittstelle, Max. Adressvolumen Ausgänge [Byte] 64
Service interface, function Diagnosis and parametrisation
Service interface, connection type socket / container / ….
Service interface, connection technology USB 2.0 type B mini
Service interface, number of pins / wires 5
Fieldbus interface information optional connection technology with accessories:,
plug/socket M12x1 B-coded, 5-pin, Protection Class IP65
Más información sobre OT-FESTO072235
Peso 220 g / Udad
GTIN 4052568291167
Tariff No. 85176200
Fabricante Festo
documentos

 
¡Todas las indicaciones se entienden como valores de referencia no vinculantes! No asumimos ninguna responsabilidad por la elección de datos no confirmada por escrito. Las indicaciones de presión se refieren, salvo indicación en contrario, a líquidos del grupo II a +20°C
Nuestros productos y mercancías están destinados exclusivamente al uso industrial y comercial.
No en stock
Medios de pago:

Apellido

Factura