SME-8-K-LED-230 (152820) proximity sensor
Número de artículo:
OT-FESTO001435
Propiedades
| Design | For T-slot |
| Complies to standard | EN 60947-5-2 |
| Permission |
RCM Mark, CCC |
| CE certificate (see declaration of conformity) |
to EU EMC directive, to EU low voltage directive |
| Material information |
Copper and PTFE-free, RoHs compliant |
| Measurement principle | Reed magnetic |
| ambient temperature [°C] | -30 to 60 |
| Control output | Bipolar contact |
| Switching element function | NO contact |
| Reproducibility of the switching value | ± 0,1 mm |
| Switch on time [ms] | 2 |
| Switch off time [ms] | 0,03 |
| Max. switching frequency [Hz] | 500 |
| Max. output current [mA] | 120 |
| Max. switching capacity AC [VA] | 10,0 |
| Max. switching capacity DC [W] | 10,00 |
| Voltage drop [V] | <= 3,9 V |
| Short circuit resistance | no |
| Overload resistant | Not available |
| Operating voltage range AC [V] | 3 to 230 |
| Operating voltage range DC [V] | 3 to 230 |
| Reverse polarity protection | no |
| Connection outlet direction | along |
| Cable length [MTR] | 2,5 |
| Cable sleeve material | TPE-U(PUR) |
| Fastening type |
clamped in t-slot, Push-in lengthwise into the slot |
| Torque [Nm] | 0,2 |
| Housing material |
PET, high-alloy stainless steel, Epoxy resin |
| Switching status indicator | LED yellow |
| Ambient temperature for moving cable placements [°C] | -5 to 60 |
| Protection category | IP68 |
| Surge voltage strength [kV] | 4,0 |
| Degree of contamination | 3 |
| Residual current [mA] | 0 |
| Electrical connection 1, connection type | cable |
| Electrical connection 1, connection technology | Open end |
| Electrical connection 1, number of pins / wires | 2 |
Más información sobre OT-FESTO001435
| Peso | 41 g / Udad |
| GTIN | 4052568070472 |
| Tariff No. | 85365080 |
| Fabricante | Festo |
documentos
- Hoja de datos (Vista de impresión)
- Hoja de datos (Inglés) (Vista de impresión)
¡Todas las indicaciones se entienden como valores de referencia no vinculantes! No asumimos ninguna responsabilidad por la elección de datos no confirmada por escrito. Las indicaciones de presión se refieren, salvo indicación en contrario, a líquidos del grupo II a +20°C
Nuestros productos y mercancías están básicamente destinados para el uso industrial y comercial.
Medios de pago: