2. Festo - Pneumatique
  3. Control technology
  4. Périphérique électrique
  5. For automation system CPX-AP-I
  6. OT-FESTO072232

CPX-E-4AI-U-I (4080493) analogue input modul

Numéro de l'article:

OT-FESTO072232

Tous les articles de ce groupe
420,32 € TVA incluse
Pièce
propriétés
Di­men­sions W x L x H 18.9 mm x 76.6 mm x 124.3 mm
Pitch di­men­sion [mm] 18,9
Diag­no­sis via LED Error per chan­nel,
Error per mo­dule
Diag­no­sis via bus Wire break,
Short cir­cuit/over­load sen­sor sup­ply,
Pa­ra­me­ter error,
Pa­ra­me­te­ring error,
over­load ana­logue in­puts,
upper limit value not held,
Over/under run­ning,
Lower limit value not main­tai­ned
Mo­dule pa­ra­me­ter Data for­mat ana­logue in­puts,
Diag­no­sis short cir­cuit sen­sor sup­ply,
Diag­no­sis pa­ra­me­te­ring error,
Diag­no­sis over­load ana­logue in­puts,
Hys­te­re­sis limit value mo­ni­to­ring,
Deac­ti­vate sen­sor sup­ply,
Be­ha­viour after over­load ana­logue in­puts,
Be­ha­viour after short cir­cuit/over­load
Chan­nel pa­ra­me­ter Diag­no­sis wire break,
Diag­no­sis upper limit value,
Diag­no­sis pa­ra­me­ter error,
Diag­no­sis lower limit value,
Diag­no­sis under run­ning/over run­ning,
Smoo­thing fac­tor,
Si­gnal range per chan­nel,
lower/upper limit value
Fuse (short cir­cuit) In­ter­nal elec­tro­nic fuse Per mo­dule
Po­ten­tial se­pa­ra­tion chan­nel - in­ter­nal bus yes
Po­ten­tial se­pa­ra­tion chan­nel - chan­nel no
Per­mis­sion RCM mark
CE cer­ti­fi­cate (see de­cla­ra­tion of confor­mi­ty) to EU EMC di­rec­tive
Os­cil­la­tion strength Trans­port use test with se­ve­ri­ty level 1 to FN 942017-​4 and EN 60068-​2-6
Shock re­sis­tance Shock test with de­gree of se­ve­ri­ty 1 to FN 942017-​5 and EN 60068-​2-27
Cor­ro­sion re­sis­tant class KBK 0 - No cor­ro­sion stres­sing
Bea­ring tem­pe­ra­ture [°C] -20 to 70
Re­la­tive hu­mi­di­ty 95 %,
Not conden­sing
Pro­tec­tion ca­te­go­ry IP20
am­bient tem­pe­ra­ture [°C] -5 to 50
In­for­ma­tion about am­bient tem­pe­ra­ture -5 - 60 °C with ver­ti­cal ins­tal­la­tion
Fas­te­ning type With Slot rail
Ma­te­rial in­for­ma­tion LABS contai­ning ma­te­rials in­clu­ded,
RoHs com­pliant
Hou­sing ma­te­rial PA
Quan­ti­ty in­puts 4
In­trin­sic power input ope­ra­ting vol­tage elec­tro­nics/sen­sors Type 70 mA
Max. cu­mu­la­tive cur­rent in­puts per mo­dule [A] 1,4
No­mi­nal ope­ra­ting vol­tage DC elec­tro­nics / sen­sor [V] 24
Per­mit­ted vol­tage os­cil­la­tions elec­tro­nics/sen­sors ± 25 %
Max. ad­dress vo­lume in­puts [Byte] 8
Elec­tri­cal connec­tion: input, func­tion Ana­logue input
Elec­tri­cal connec­tion: input, connec­tion type 4x multi tube hol­der
Elec­tri­cal connec­tion: input, connec­tion tech­no­lo­gy Spring ten­sion clamp
Elec­tri­cal connec­tion: input, num­ber of pins / wires 4
Elec­tri­cal connec­tion: inlet, conduc­tor cross-​section [mm²] 0.2 to 1.5
Elec­tri­cal connec­tion: inlet, in­for­ma­tion on conduc­tor cross-​section 0.2 - 2.5 mm² for flexible conduc­tor wi­thout wire end sleeve
Mea­su­red pa­ra­me­ter Vol­tage,
Cur­rent
Re­pea­ta­bi­li­ty ±0.1 % at 25 °C
Use error li­mits re­la­ted to am­bient tem­pe­ra­ture range ±0,3 %
Base error limit at 25 °C ±0,2 %
Power bla­ckout brid­ging [ms] 10
Si­gnal range -10 - 10 V,
-20 - 20 mA,
-5 - 5 V,
0 - 10 V,
0 - 20 mA,
1 - 5 V,
4 - 20 mA
Data for­mat 15 bit + sign,
li­near scale
Max. line length 30 m,
Shiel­ded
Elec­tri­cal connec­tion: input 2, func­tion Func­tio­nal ground
Elec­tri­cal connec­tion: input 2, connec­tion type Multi tube hol­der
Elec­tri­cal connec­tion: input 2, connec­tion tech­no­lo­gy Spring ten­sion clamp
Elec­tri­cal connec­tion: input 2, num­ber of pins / wires 4
Elec­tri­cal connec­tion: input 2, wi­ring dia­gram 00995842
Elec­tri­cal connec­tion: input 2, conduc­tor cross-​section [mm²] 0.2 to 1.5
Elec­tri­cal connec­tion: inlet 2, in­for­ma­tion on conduc­tor cross-​section 0.2 - 2.5 mm² for flexible conduc­tor wi­thout wire end sleeve
Informations sur OT-FESTO072232
Poids 105 g / Pièce
GTIN 4052568291136
Numéro des marchandises en douane 85389099
Fabricant Festo
Documents

 
Toutes les données sont fournies à titre de valeurs indicatives ! Nous n'assumons aucune responsabilité pour les sélections de données non confirmées par écrit. Les valeurs de pression correspondent, sauf indication contraire, à des fluides du groupe II à +20°C.
Livraison possible dès maintenant
Possibilités de paiement:

Paiement à la livraison

Facture