2. Festo - Pneumatique
  3. Control technology
  4. Périphérique électrique
  5. For automation system CPX-AP-I
  6. OT-FESTO082502

CPX-E-CEC-C1-EP (4252742) controller

Numéro de l'article:

OT-FESTO082502

Tous les articles de ce groupe
1 587,10 € TVA incluse
Pièce
propriétés
Di­men­sions W x L x H 75.9 mm x 124.3 mm x 82.5 mm
Pitch di­men­sion [mm] 18,9
Diag­no­sis via LED Force mode
Mo­dule pa­ra­me­ter Bund­ling chan­nel alarms,
Diag­no­sis under-​voltage,
Chan­nel alarms under-​voltage,
Pro­cess value dis­play ana­logue mo­dules
Vol­tage sup­ply, connec­tion type Multi tube hol­der
Vol­tage sup­ply, connec­tion tech­no­lo­gy Spring ten­sion clamp
Vol­tage sup­ply, num­ber of poles/wires 4
Vol­tage sup­ply, conduc­tor cross-​section [mm²] 0.2 to 1.5
Vol­tage sup­ply, in­for­ma­tion on conduc­tor cross-​section 0.2 - 2.5 mm² for flexible conduc­tor wi­thout wire end sleeve
Per­mis­sion RCM mark,
c UL us - Lis­ted (OL)
CE cer­ti­fi­cate (see de­cla­ra­tion of confor­mi­ty) to EU EMC di­rec­tive
Os­cil­la­tion strength Trans­port use test with se­ve­ri­ty level 1 to FN 942017-​4 and EN 60068-​2-6
Shock re­sis­tance Shock test with de­gree of se­ve­ri­ty 1 to FN 942017-​5 and EN 60068-​2-27
Cor­ro­sion re­sis­tant class KBK 0 - No cor­ro­sion stres­sing
Bea­ring tem­pe­ra­ture [°C] -20 to 70
Re­la­tive hu­mi­di­ty 95 %,
Not conden­sing
Pro­tect against di­rect and in­di­rect contact Funk­tionsk­leins­pan­nung mit si­che­rer Tren­nung (PELV)
Pro­tec­tion ca­te­go­ry IP20
am­bient tem­pe­ra­ture [°C] -5 to 50
In­for­ma­tion about am­bient tem­pe­ra­ture -5 - 60 °C with ver­ti­cal ins­tal­la­tion
Max. ad­dress vo­lume out­puts [Byte] 64
Fas­te­ning type With Slot rail
Ma­te­rial in­for­ma­tion LABS contai­ning ma­te­rials in­clu­ded,
RoHs com­pliant
Hou­sing ma­te­rial PA
In­trin­sic power input ope­ra­ting vol­tage elec­tro­nics/sen­sors Type 150 mA
No­mi­nal ope­ra­ting vol­tage DC elec­tro­nics / sen­sor [V] 24
Per­mit­ted vol­tage os­cil­la­tions elec­tro­nics/sen­sors ± 25 %
Max. ad­dress vo­lume in­puts [Byte] 64
Power bla­ckout brid­ging [ms] 20
Confi­gu­ra­tion sup­port CO­DE­SYS V3,
Be­die­nein­heit CDSB
Max. num­ber of mo­dules 10
Sys­tem pa­ra­me­ter Diag­no­sis me­mo­ry,
Fail­safe reac­tion,
Sys­tem start
Weight DIP-​Schalter für RUN/STOP,
Op­tio­nal: Be­die­nein­heit CDSB,
Dreh­schal­ter für Adres­seins­tel­lung
Max. power sup­ply [A] 8
Vol­tage sup­ply, func­tion Elec­tro­nics and sen­sors
Field­bus in­ter­face, gal­va­ni­cal­ly se­pa­ra­ted yes
Field­bus in­ter­face, trans­fer rate 100 Mbit/s
Field­bus in­ter­face Ether­net
Field­bus in­ter­face, connec­tion type 2x so­cket
Field­bus in­ter­face, connec­tion tech­no­lo­gy RJ45
Field­bus in­ter­face, num­ber of pins / wires 8
Field­bus in­ter­face, re­port Ether­net / IP
Feldbus-​Schnittstelle, Max. Adress­vo­lu­men Eingänge [Byte] 512
Feldbus-​Schnittstelle, Max. Adress­vo­lu­men Ausgänge [Byte] 512
CPU data 512 MB RAM,
Dual Core 766 MHz
Ad­di­tio­nal func­tions CO­DE­SYS V3
Me­mo­ry me­dium Micro SD<= 32 GB,
USB stick<= 32 GB
Pro­ces­sing time ap­prox. 200 µs/1 k ins­truc­tion
Set­ting IP ad­dress DHCP,
over Co­De­Sys,
op­tio­nal: via control unit CDSB
Func­tio­nal buil­ding block und an­dere,
CPX-E Diag­no­ses­ta­tus,
CPX-E Diag­no­se­trace ko­pie­ren,
CPX-E Mo­dul­diag­nose lesen
Mar­ker Va­riable concept Co­De­Sys,
120 kB re­si­dual data
Pro­gram­ming soft­ware CO­DE­SYS pro­vi­ded by Festo
Pro­gram­ming me­mo­ry 12 MB user pro­gram
USB in­ter­face USB 2.0
Ether­net in­ter­face, connec­tion type 2x so­cket
Ether­net in­ter­face, connec­tion tech­no­lo­gy RJ45
Ether­net in­ter­face, num­ber of pins / wires 8
Ether­net in­ter­face, trans­fer speed 100 Mbit/s,
10 Mbit/s
Ether­net in­ter­face, func­tion Switch,
Diag­no­sis
Ether­net in­ter­face, re­port Ea­syIP,
Mod­bus TCP,
TCP/IP
Field­bus in­ter­face 2, connec­tion type so­cket / contai­ner / ….
Field­bus in­ter­face 2, connec­tion tech­no­lo­gy RJ45
Field­bus in­ter­face 2, num­ber of pins / wires 8
Field­bus in­ter­face 2, func­tion Bus connec­tor for­war­ding
Field­bus in­ter­face 2, type Ether­net
Field­bus in­ter­face 2, re­port Ether­CAT Mas­ter
Field­bus in­ter­face 2, gal­va­ni­cal­ly se­pa­ra­ted yes
Field­bus in­ter­face 2, trans­fer rate 100 Mbit/s
Informations sur OT-FESTO082502
Poids 400 g / Pièce
GTIN 4052568418083
Numéro des marchandises en douane 85371091
Fabricant Festo
Documents

 
Toutes les données sont fournies à titre de valeurs indicatives ! Nous n'assumons aucune responsabilité pour les sélections de données non confirmées par écrit. Les valeurs de pression correspondent, sauf indication contraire, à des fluides du groupe II à +20°C.
Non disponible en stock
Possibilités de paiement:

Paiement à la livraison

Facture