2. Festo - Pneumatyka
  3. Control technology
  4. Peryferia elektryczne
  5. For automation system CPX-AP-I
  6. OT-FESTO072235

CPX-E-PB (4080496) bus module

Numéro de l'article:

OT-FESTO072235

Tous les articles de ce groupe
470,75 € 19 % TVA incluse
Pièce
propriétés
Di­men­sions W x L x H 42.2 mm x 125.8 mm x 76.5 mm
Pitch di­men­sion [mm] 18,9
Diag­no­sis via LED Force mode,
Bus error,
Vol­tage sup­ply elec­tro­nics/sen­sors,
Vol­tage sup­ply load,
Sys­tem error
Diag­no­sis via bus Under-​voltage,
re­qui­red func­tion not sup­por­ted,
Wire break,
Short cir­cuit,
not ready for data ex­change,
Pa­ra­me­te­ring error,
Buf­fer over­flow,
upper limit value not held,
Trans­mis­sion error,
lower limit value not main­tai­ned,
Wat­ch­dog/IO Sta­tus
Mo­dule pa­ra­me­ter Diag­no­sis under-​voltage,
Pro­cess value dis­play ana­logue mo­dules
Vol­tage sup­ply, connec­tion type Multi tube hol­der
Vol­tage sup­ply, connec­tion tech­no­lo­gy Spring ten­sion clamp
Vol­tage sup­ply, num­ber of poles/wires 4
Vol­tage sup­ply, conduc­tor cross-​section [mm²] 0.2 to 1.5
Vol­tage sup­ply, in­for­ma­tion on conduc­tor cross-​section 0.2 - 2.5 mm² for flexible conduc­tor wi­thout wire end sleeve
Per­mis­sion RCM mark
CE cer­ti­fi­cate (see de­cla­ra­tion of confor­mi­ty) to EU EMC di­rec­tive
Os­cil­la­tion strength Trans­port use test with se­ve­ri­ty level 1 to FN 942017-​4 and EN 60068-​2-6
Shock re­sis­tance Shock test with de­gree of se­ve­ri­ty 1 to FN 942017-​5 and EN 60068-​2-27
Cor­ro­sion re­sis­tant class KBK 0 - No cor­ro­sion stres­sing
Bea­ring tem­pe­ra­ture [°C] -20 to 70
Re­la­tive hu­mi­di­ty 95 %,
Not conden­sing
Pro­tect against di­rect and in­di­rect contact Funk­tionsk­leins­pan­nung mit si­che­rer Tren­nung (PELV)
Pro­tec­tion ca­te­go­ry IP20
am­bient tem­pe­ra­ture [°C] -5 to 50
In­for­ma­tion about am­bient tem­pe­ra­ture -5 - 60 °C with ver­ti­cal ins­tal­la­tion
Max. ad­dress vo­lume out­puts [Byte] 64
Fas­te­ning type With Slot rail
Ma­te­rial in­for­ma­tion LABS contai­ning ma­te­rials in­clu­ded,
RoHs com­pliant
Hou­sing ma­te­rial PA
In­trin­sic power input ope­ra­ting vol­tage elec­tro­nics/sen­sors Type 75 mA
No­mi­nal ope­ra­ting vol­tage DC elec­tro­nics / sen­sor [V] 24
Per­mit­ted vol­tage os­cil­la­tions elec­tro­nics/sen­sors ± 25 %
Max. ad­dress vo­lume in­puts [Byte] 64
Power bla­ckout brid­ging [ms] 20
Confi­gu­ra­tion sup­port GSD file
Max. num­ber of mo­dules 10
Sys­tem pa­ra­me­ter Force mode,
Diag­no­sis me­mo­ry,
Fail­safe reac­tion,
Sys­tem start
Weight DIL switch
Max. power sup­ply [A] 8
Vol­tage sup­ply, func­tion Elec­tro­nics and sen­sors
In­for­ma­tion about out­puts 62 Byte mit E/A-​Diagnose-Interface,
64 Byte ohne Diag­nose,
64 Byte mit Sta­tus­bits
In­for­ma­tion out in­puts 62 byte with I/O diag­no­sis in­ter­face,
63 byte with sta­tus bits,
64 byte wi­thout diag­no­sis
Field­bus in­ter­face, gal­va­ni­cal­ly se­pa­ra­ted yes
Field­bus in­ter­face, trans­fer rate 9.6 kbit/s,
19.2 kbit/s,
93.75 kbit/s,
187.5 kbit/s,
500 kbit/s,
1.5 Mbit/s,
3 Mbit/s,
6 Mbit/s,
12 Mbit/s
Field­bus in­ter­face Pro­fi­bus
Field­bus in­ter­face, connec­tion type so­cket / contai­ner / ….
Field­bus in­ter­face, connec­tion tech­no­lo­gy Sub-D
Field­bus in­ter­face, num­ber of pins / wires 9
Field­bus in­ter­face, re­port Pro­fi­bus DP
Feldbus-​Schnittstelle, Max. Adress­vo­lu­men Eingänge [Byte] 64
Feldbus-​Schnittstelle, Max. Adress­vo­lu­men Ausgänge [Byte] 64
Ser­vice in­ter­face, func­tion Diag­no­sis and pa­ra­me­tri­sa­tion
Ser­vice in­ter­face, connec­tion type so­cket / contai­ner / ….
Ser­vice in­ter­face, connec­tion tech­no­lo­gy USB 2.0 type B mini
Ser­vice in­ter­face, num­ber of pins / wires 5
Field­bus in­ter­face in­for­ma­tion op­tio­nal connec­tion tech­no­lo­gy with ac­ces­so­ries:,
plug/so­cket M12x1 B-​coded, 5-pin, Pro­tec­tion Class IP65
Informations sur OT-FESTO072235
Poids 220 g / Pièce
GTIN 4052568291167
Tariff No. 85176200
Fabricant Festo
Documents

 
Toutes les données sont fournies à titre de valeurs indicatives ! Nous n'assumons aucune responsabilité pour les sélections de données non confirmées par écrit. Les valeurs de pression correspondent, sauf indication contraire, à des fluides du groupe II à +20°C.
Nos produits et marchandises sont destinés exclusivement à un usage industriel et commercial.
Non disponible en stock
Possibilités de paiement:

Paiement à la livraison

Facture