SPAE-V1R-Q3-PNLK-2.5K (8001442) pressure sensor
Numéro de l'article:
OT-FESTO059156
105,27 €
TVA incluse
Quantité Pièce
propriétés
| Permission |
RCM mark, c UL us - Recognized (OL) |
| CE certificate (see declaration of conformity) |
acc. to EU-EMV Directive, acc. to EU-RoHS Directive |
| KC-mark | KC-EMV |
| Material information | RoHs compliant |
| Measured parameter | Relative pressure |
| Measurement process | Piezoresistive pressure sensor with display |
| Pressure measurement range starting value [bar] | 0 |
| Pressure measurement range end value [bar] | -1 |
| Overload range [bar] | 5 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium | Oiled operation possible |
| Medium temperature [°C] | 0 to 50 |
| ambient temperature [°C] | 0 to 50 |
| Resolution analogue-digital converter [Bit] | 10 |
| Accuracy FS [%FS] | 1,5 |
| Repeatability in ± %FS [%FS] | 0,3 |
| Temperature coefficient in ± %FS/K [%FS/K] | 0,05 |
| Control output | PNP/NPN switchable |
| Switch function | Freely programmable |
| Switching element function |
NC contact, NO contact, Switchable |
| Max. output current [mA] | 100 |
| display range starting value [%FS] | 0 |
| Display range end value [%FS] | 99 |
| Short circuit resistance | yes |
| Report | IO-Link |
| IO-Link, report | Device V 1.1 |
| IO-Link, profile | Smart sensor profile |
| IO-Link, function classes |
Teach channel, Diagnosis, Identification, Binary data channel (BDC), Process data variables (PDV) |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO mode support | yes |
| IO-Link, port type | A |
| IO-Link, process data width OUT | 0 Bytes |
| IO-Link, process data width IN | 2 Bytes |
| IO-Link, process data contents IN |
14 bit PDV (pressure measurement), 2 bit BDC (pressure monitoring) |
| IO-Link, minimum cycle time | 3 ms |
| IO-Link, data memory needed [Byte] | 500 |
| Operating voltage range DC [V] | 18 to 30 |
| Reverse polarity protection | for all electrical connections |
| Electrical connection |
3-wire, cable, Open end |
| Cable length [MTR] | 2,5 |
| Fastening type | With Accessories |
| installation position | arbitrary |
| Pneumatic connection | QS-3 |
| Housing material | PA reinforced |
| Gasket material | NBR |
| Display type |
LED display, 2 digit |
| Presentable unit(s) | %FS |
| Switching status indicator | LED yellow |
| Setting options |
IO-Link, Teach-In, über Display und Tasten |
| Tamper-proof fuse | PIN code |
| Settings range threshold value [%] | 1 to 98 |
| Protection category | IP40 |
| Corrosion resistant class KBK | 2 - moderate corrosion stress |
Informations sur OT-FESTO059156
| Poids | 115 g / Pièce |
| GTIN | 4052568277192 |
| Numéro des marchandises en douane | 90262020 |
| Fabricant | Festo |
Documents
- Groupe fiche technique: SPAE (english) (PDF)
- Groupe fiche technique: SPAE (francais) (PDF)
- Documentation (francais) (PDF)
- Fiche technique (Aperçu avant impression)
- Fiche technique (anglais) (Aperçu avant impression)
Toutes les données sont fournies à titre de valeurs indicatives ! Nous n'assumons aucune responsabilité pour les sélections de données non confirmées par écrit. Les valeurs de pression correspondent, sauf indication contraire, à des fluides du groupe II à +20°C.
à nouveau disponible à la livraison dans ⌀ 4 semaines
Possibilités de paiement: