CMMO-ST-C5-1-LKP (1512320) motor controller
Codice articolo:
OT-FESTO057263
Proprietà
| Fastening type |
on connection plate, With Slot rail, Permanently screwed |
| Display |
Seven segment display, LED green / red |
| Permission |
RCM mark, c UL us - Listed (OL) |
| KC-mark | KC-EMV |
| CE certificate (see declaration of conformity) |
to EU EMC directive, to EU machinery directive |
| Bearing temperature [°C] | -25 to 75 |
| ambient temperature [°C] | 0 to 50 |
| UL - ambient temperature [°C] | 0 to 40 |
| Relative humidity |
0 - 90 %, Not condensing |
| Protection category | IP40 |
| Material information | RoHs compliant |
| Nominal current load supply [A] | 6 |
| Peak current load supply [A] | 8 |
| Network filter | integrated |
| Nominal voltage load supply DC [V] | 24 |
| Max. intermediate circuit voltage DC [V] | 31 |
| Braking resistance [Ohm] | 15 |
| Impulse power braking resistance [kVA] | 0,1 |
| Nominal voltage logic supply DC [V] | 24 |
| Permitted range logic voltage | ± 15 % |
| Nominal current logic supply [A] | 0,3 |
| Nominal output current [A] | 5,7 |
| Operating mode controller |
PWN, MOSFET power end level, P position controller, Cascade controller with, PI speed controller, Proportional and integral controller for current |
| Adjustable current lowering | Via software |
| Step setting | Via software |
| Protection function |
I²t monitoring, Drag error monitoring, Software endpoint detection, Voltage blackout detection, Current monitoring, Temperature monitoring |
| Nominal current setting | Via software |
| Parameterising interface | Ethernet |
| Ethernet supported protocols | TCP/IP, Modbus TCP |
| Rotor position transducer | Encoder |
| Position transducer | Encoder |
| Encoder input interface, properties | RS422 |
| Quantity digital logic inputs | 1 |
| Switching logic inputs | PNP (Positive switching) |
| Properties logic inputs | Galvanically connected with logic potential |
| Logic input specification | Depending on IEC 61131-2 |
| Work area logic input [V] | 24 |
| Quantity digital logic outputs 24 V DC | 3 |
| Switching logic outputs | PNP (Positive switching) |
| Properties digital logic outputs |
Partially freely configurable, Not galvanically separated |
| Max. current digital logic outputs [mA] | 100 |
| Safety function | Safe switched off torque (STO) |
| Safety Integrity Level (SIL) | Safe switched off torque (STO) / SIL 3 |
| Performance Level (PL) | Safe Torque off (STO) / category 3, Performance Level e |
| Report |
FHPP, I-port, IO-Link, Modbus TCP |
| Fieldbus coupling | Ethernet |
| Communication profile | FHPP |
| IO-Link, connection technology | Cage Clamp |
| IO-Link, report | Device V 1.1 |
| IO-Link, communication mode | COM3 (230.4 kBaud) |
| IO-Link, number of ports | Device 1 |
| IO-Link, process data width OUT | Parameterisable 8 or 16 Bytes |
| IO-Link, process data contents OUT | Parameterisable FHPP or FHPP+FPC |
| IO-Link, process data width IN | Parameterisable 8 or 16 Bytes |
| IO-Link, process data contents IN | Parameterisable FHPP or FHPP+FPC |
| IO-Link, minimum cycle time | 1 ms |
Maggiori informazioni su OT-FESTO057263
| Peso | 390 g / Pz. |
| GTIN | 4052568263553 |
| Codice doganale della merce | 85044085 |
| Produttore | Festo |
Documenti
- Scheda tecnica del gruppo: CMMO-ST (english) (PDF)
- Documentazione (english) (PDF)
- Scheda tecnica (Anteprima di stampa)
- Scheda tecnica (Italiano) (Anteprima di stampa)
Tutti i dati sono da intendersi come valori indicativi! Non ci assumiamo alcuna responsabilità per i dati non confermati per iscritto. Se non diversamente indicato, i dati sulla pressione si riferiscono ai liquidi del gruppo II a +20°C.
Metodi di pagamento: