2. Festo – pneumatik
  3. Control technology
  4. Elektrisk periferi
  5. For automation system CPX-AP-I
  6. OT-FESTO072235

CPX-E-PB (4080496) bus module

Codice articolo:

OT-FESTO072235

Tutti gli articoli di questo gruppo
470,75 € incl. IVA
Pz.
Proprietà
Dimensions W x L x H 42.2 mm x 125.8 mm x 76.5 mm
Pitch dimension [mm] 18,9
Diagnosis via LED Force mode,
Bus error,
Voltage supply electronics/sensors,
Voltage supply load,
System error
Diagnosis via bus Under-voltage,
required function not supported,
Wire break,
Short circuit,
not ready for data exchange,
Parametering error,
Buffer overflow,
upper limit value not held,
Transmission error,
lower limit value not maintained,
Watchdog/IO Status
Module parameter Diagnosis under-voltage,
Process value display analogue modules
Voltage supply, connection type Multi tube holder
Voltage supply, connection technology Spring tension clamp
Voltage supply, number of poles/wires 4
Voltage supply, conductor cross-section [mm²] 0.2 to 1.5
Voltage supply, information on conductor cross-section 0.2 - 2.5 mm² for flexible conductor without wire end sleeve
Permission RCM mark
CE certificate (see declaration of conformity) to EU EMC directive
Oscillation strength Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27
Corrosion resistant class KBK 0 - No corrosion stressing
Bearing temperature [°C] -20 to 70
Relative humidity 95 %,
Not condensing
Protect against direct and indirect contact Funktionskleinspannung mit sicherer Trennung (PELV)
Protection category IP20
ambient temperature [°C] -5 to 50
Information about ambient temperature -5 - 60 °C with vertical installation
Max. address volume outputs [Byte] 64
Fastening type With Slot rail
Material information LABS containing materials included,
RoHs compliant
Housing material PA
Intrinsic power input operating voltage electronics/sensors Type 75 mA
Nominal operating voltage DC electronics / sensor [V] 24
Permitted voltage oscillations electronics/sensors ± 25 %
Max. address volume inputs [Byte] 64
Power blackout bridging [ms] 20
Configuration support GSD file
Max. number of modules 10
System parameter Force mode,
Diagnosis memory,
Failsafe reaction,
System start
Weight DIL switch
Max. power supply [A] 8
Voltage supply, function Electronics and sensors
Information about outputs 62 Byte mit E/A-Diagnose-Interface,
64 Byte ohne Diagnose,
64 Byte mit Statusbits
Information out inputs 62 byte with I/O diagnosis interface,
63 byte with status bits,
64 byte without diagnosis
Fieldbus interface, galvanically separated yes
Fieldbus interface, transfer rate 9.6 kbit/s,
19.2 kbit/s,
93.75 kbit/s,
187.5 kbit/s,
500 kbit/s,
1.5 Mbit/s,
3 Mbit/s,
6 Mbit/s,
12 Mbit/s
Fieldbus interface Profibus
Fieldbus interface, connection type socket / container / ….
Fieldbus interface, connection technology Sub-D
Fieldbus interface, number of pins / wires 9
Fieldbus interface, report Profibus DP
Feldbus-Schnittstelle, Max. Adressvolumen Eingänge [Byte] 64
Feldbus-Schnittstelle, Max. Adressvolumen Ausgänge [Byte] 64
Service interface, function Diagnosis and parametrisation
Service interface, connection type socket / container / ….
Service interface, connection technology USB 2.0 type B mini
Service interface, number of pins / wires 5
Fieldbus interface information optional connection technology with accessories:,
plug/socket M12x1 B-coded, 5-pin, Protection Class IP65
Maggiori informazioni su OT-FESTO072235
Peso 220 g / Pz.
GTIN 4052568291167
Codice doganale della merce 85176200
Produttore Festo
Documenti

 
Tutti i dati sono da intendersi come valori indicativi! Non ci assumiamo alcuna responsabilità per i dati non confermati per iscritto. Se non diversamente indicato, i dati sulla pressione si riferiscono ai liquidi del gruppo II a +20°C.
Non disponibile a magazzino
Metodi di pagamento:

Spedizione in contrassegno

Fattura