Ordina nel fine settimana entro domenica ore 15 (oppure se il lunedì è festivo, entro lunedì ore 15) e ricevi la merce, in Germania, tramite GLS il giorno lavorativo successivo prima delle 12 (costo: 5%, min. 30,00 €).
DFPD-40-RP-90-RS60-F04-R3-EP (8047643) semi-rotary drive
Codice articolo:
OT-FESTO070912
222,85 €
incl. IVA
Quantità Pz.
Proprietà
| Position drive dimensions | 40 |
| Flange drilling screen | F04 |
| Swivel angle [deg] | 90 |
| Adjustable range end position at 0° [deg] | -5 to 5 |
| Adjustable range end position at 90° [deg] | -5 to 5 |
| Shaft connection Depth [mm] | 12 |
| Standard connection to fitting | ISO 5211 |
| installation position | arbitrary |
| Principle of operation | single action |
| Construction set up | Toothed rack/pinion |
| Closing direction | Right closing |
| Valve connection corresponds to standard | VDI/VDE 3845 (NAMUR) |
| Connection for position controllers and position feedback signal comply with standard | VDI/VDE 3845 Size AA 1 |
| Safety Integrity Level (SIL) | Produkt kann eingesetzt werden in SRP/CS bis SIL 2 High Demand |
| Operating pressure [bar] | 2 to 8 |
| Nominal operating pressure [bar] | 6,0 |
| CE certificate (see declaration of conformity) | to EU EX protection directive (ATEX) |
| Certified awarding point | TÜV Rhineland |
| ATEX gas category | II 2G |
| ATEX dust category | II 2D |
| Ex ignition protection type gas | Ex h IIC T4 Gb X |
| Ex ignition protection type dust | Ex h IIIC T105°C Db X |
| Ex ambient temperature | -20°C <= Ta <= +80°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium |
Oiled operation possible (required in further operations), Pressure dew point 10°C under ambient and medium temperature |
| Bearing temperature [°C] | -20 to 60 |
| ambient temperature [°C] | -20 to 80 |
| Rotary torque for nominal operating pressure and 0° pivot angle [Nm] | 28,0 |
| Rotary torque for nominal operating pressure and 90° pivot angle [Nm] | 14,5 |
| Information about torque | The operating torque of the actuator may not be higher than the maximum permitted torque listed in ISO 5211, related to the size of the fastening flange and the coupling. |
| Air consumption a 6 bar per cycle 0°-90°-0° [LTR] | 1,5 |
| Shaft connection | T11 |
| Pneumatic connection | G1/8 |
| Material information | RoHs compliant |
| Connection plate material | Aluminium wrought alloy, anodised |
| Cover material | Alu-Druckguss, beschichtet |
| Seals material | NBR |
| Housing material | Aluminium wrought alloy, anodised |
| Piston material | Aluminium die casting |
| Bearing material | POM |
| Lug material | Cast stainless steel |
| Screws material | High-alloyed stainless steels |
| Shaft material | High-alloyed stainless steels |
| Spring force torque at a swivel angle 0° [Nm] | 13,8 |
| Spring force torque at 90° [Nm] | 27,2 |
| Spring material | spring steel |
Maggiori informazioni su OT-FESTO070912
| Peso | 2,5 kg / Pz. |
| GTIN | 4052568287542 |
| Codice doganale della merce | 84123900 |
| Produttore | Festo |
Documenti
- Documentazione (english) (PDF)
- Scheda tecnica del gruppo: DFPD (english) (PDF)
- Scheda tecnica (Anteprima di stampa)
- Scheda tecnica (Italiano) (Anteprima di stampa)
Tutti i dati sono da intendersi come valori indicativi! Non ci assumiamo alcuna responsabilità per i dati non confermati per iscritto. Se non diversamente indicato, i dati sulla pressione si riferiscono ai liquidi del gruppo II a +20°C.
Metodi di pagamento: