ACE shock absorber, M 20x1,5, self-adjusting, stroke 12,7 mm
Št. Izdelka:
MC 225 EUMH2
Opis artikla
Materials:
shock absorber body and accessory: Steel bronzing, piston rod: hardened, stainless steel, roller type diaphragm: ethylene-propylene
Temperature range:
0 do +66 °C
Stroke speed:
0,06 do 6 m/s
Fixed limit stop:
integrated
Information:
Exceeding W4: (max. energy absorbed per hour expressed in Nm/h) is possible when switched off temporarily or the shock absorber is cooled with the cylinder exhaust air (take note of the approved heating)
shock absorber body and accessory: Steel bronzing, piston rod: hardened, stainless steel, roller type diaphragm: ethylene-propylene
Temperature range:
0 do +66 °C
Stroke speed:
0,06 do 6 m/s
Fixed limit stop:
integrated
Information:
Exceeding W4: (max. energy absorbed per hour expressed in Nm/h) is possible when switched off temporarily or the shock absorber is cooled with the cylinder exhaust air (take note of the approved heating)
Lastnosti
| Navoj B | M 20x1,5 |
| Hod | 12,7 |
| najv. poraba energije na dvig (W3) | 41 |
| najv. poraba energije na uro (W4) | 45000 |
| efektivna masa (me) | 180 - 910 |
| Vzmetna sila | 4 - 9 |
| A | 7,2 |
| C | 79,2 |
| E | 8 |
| G | 6,3 |
| I | 17,5 |
| SW1 | 8 |
| SW2 | 23 |
| najv. odstopanje osi* | 4 |
| Udarna glava | PP 225 |
| Vpenjalna prirobnica | MB 20 |
| Zaporni ročaj | AH 20 |
| Podaljšek** | BV 20 |
| Protimatica | KM 20 |
Dodatne informacije o MC225EUMH2
| Teža | 125 g / Kos |
| GTIN | 4050571481254 |
| Številka carinskega blaga | 84879059 |
| Skladno z RoHS | Da |
| Proizvajalec | ACE |
Dokumenti
- Catalogue page Atlas 9 (Page 899_900) (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
*at higher axial deviations use side load adapters (Type BV)
***The side load adapter can only be fitted on shock absorbers without an impact head, or if required, it must be dismantled.
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: