Preprosto naročite za vikend do nedelje ob 15. uri (ali če je v ponedeljek praznik do ponedeljka ob 15. uri) in prejmite blago v Nemčiji prek GLS-a naslednji delovni dan pred 12. uro (stroški: 5%, min. 30,00 &euro).
Opis artikla
Properties, Tangit:
Tangit PVC-U, the proven basic glue for PVC-U glued fittings in the brush-in-cap can (125 g is supplied in the form of a tube). The glued joint is as strong as the raw material PVC-U (exception: concentrated acids, alkalis and strong oxidising agents). WRAS approval. Open time approx. 4 minutes, final strength after 24 hours.
Properties, Tangit DTX:
Tangit DTX special adhesives for critical media like sulphuric acid (<93%), hydrochloric acid (<37%), nitric acid (<55%), sodium hypochlorite (<15%), hydrogen peroxide (<70%), hydrofluoric acid (<40%). Opening time approx. 1 minute, final strength after 48 hours.
Properties, WDF-05:
Express adhesive in the brush tin. The adhesive joint is as strong as the raw material PVC-U (exception: concentrated acids, alkalis and strong oxidising agents). WRAS approval. Open time <1 minute, final strength 15 minutes to 16 hours depending on the diameter and the pressure.
Recommendation:
Before gluing, clean the surfaces to be glued with Tangit PVC cleaner.
Tangit PVC-U, the proven basic glue for PVC-U glued fittings in the brush-in-cap can (125 g is supplied in the form of a tube). The glued joint is as strong as the raw material PVC-U (exception: concentrated acids, alkalis and strong oxidising agents). WRAS approval. Open time approx. 4 minutes, final strength after 24 hours.
Properties, Tangit DTX:
Tangit DTX special adhesives for critical media like sulphuric acid (<93%), hydrochloric acid (<37%), nitric acid (<55%), sodium hypochlorite (<15%), hydrogen peroxide (<70%), hydrofluoric acid (<40%). Opening time approx. 1 minute, final strength after 48 hours.
Properties, WDF-05:
Express adhesive in the brush tin. The adhesive joint is as strong as the raw material PVC-U (exception: concentrated acids, alkalis and strong oxidising agents). WRAS approval. Open time <1 minute, final strength 15 minutes to 16 hours depending on the diameter and the pressure.
Recommendation:
Before gluing, clean the surfaces to be glued with Tangit PVC cleaner.
Lastnosti
| Izvedba | WDF-05 (Express) |
| Vsebina | 500 |
Nevarnost
Dodatne informacije o WDFKLEB50
| Teža | 550 g / Kos |
| GTIN | 4050571912819 |
| Številka carinskega blaga | 35061000 |
YouTube videi:
Dokumenti
- Catalogue page Atlas 9 (Page 452) (PDF)
- Safety data sheet (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: