2.288,37 €
z DDV
Količina Kos
Lastnosti
| Fastening type |
on connection plate, Permanently screwed |
| Display | Seven segment display |
| Permission |
RCM mark, c UL us - Listed (OL) |
| CE certificate (see declaration of conformity) |
acc. to EU-EMV Directive, acc. to EU Machine Directive, acc. to EU Low voltage Directive, acc. to EU-RoHS Directive |
| Bearing temperature [°C] | -25 to 70 |
| ambient temperature [°C] | 0 to 40 |
| Relative humidity | 0 - 90 % |
| Protection category |
IP10, IP20 |
| Degree of contamination | 2 |
| Material information |
LABS containing materials included, RoHs compliant |
| Phase nominal operating voltage | 1-phase |
| Nominal operating voltage AC [V] | 230 |
| Permitted voltage oscillations | ± 10 % |
| Network frequency [Hz] | 50 to 60 |
| Nominal current [A] | 4 to 6 |
| Network filter | integrated |
| Max. intermediate circuit voltage DC [V] | 320 |
| Braking resistance [Ohm] | 60 |
| Impulse power braking resistance [kVA] | 2,8 |
| Nominal voltage logic supply DC [V] | 24 |
| Permitted range logic voltage | ± 20 % |
| Power input logic supply without parking brake [A] | 0,65 |
| Output voltage range AC | 3x 0 - 270 V |
| Nominal output current [A] | 5,0 |
| Nominal current per phase, effective [A] | 5,0 |
| Peak current per phase, effective [A] | 10 |
| Max. peak current duration [s] | 5 |
| Nominal performance controller [VA] | 1.000 |
| Peak performance [VA] | 2.000 |
| Output frequency [Hz] | 0 to 1000 |
| Parameterising interface |
USB, Ethernet, Parameterising and commissioning |
| Fieldbus coupling |
CANopen, Modbus/TCP |
| Communication profile | DS301/DSP402 |
| Process coupling |
I/O coupling, for 256 mobile sets |
| Max. fieldbus transfer rate [Mbit/s] | 1 |
| Bus connector |
Sub-D, 9 pin, Plug |
| Encoder output interface, properties | Resolution 16384 ppr |
| Encoder output interface, function |
Actual value feedback via encoder signals for speed control mode, Target value for downstream switched slave actuator |
| Encoder input interface, properties |
EnDat, HIPERFACE, RS422, SINCOS, 3 phase encoder signals |
| Encoder input interface, function |
In synchronous mode as a speed preset of the slave actuator, Encoder signal target speed value |
| Quantity digital logic inputs | 10 |
| Properties logic inputs |
Freely configurable, Galvanically separated |
| Work area logic input [V] | 8 to 30 |
| Quantity digital logic outputs 24 V DC | 5 |
| Properties digital logic outputs |
Galvanically separated, Partially freely configurable |
| Max. current digital logic outputs [mA] | 100 |
| Quantity analogue target value inputs | 2 |
| Properties target value inputs |
Differential inputs, Configurable for speed, Configurable for current |
| Work area target value input | ± 10 V |
| Impedance target value input [kOhm] | 20 |
| Quantity analogue monitor outputs | 2 |
| Work area monitor outputs | ± 10 V |
| Resolution monitor outputs [Bit] | 9 |
| Properties monitor outputs | Short circuit proof |
| Certified awarding point |
01/205/5162.02/19, TÜV Rheinland |
| Active PFC | yes |
| Safety function |
Safe switched off torque (STO), Safe stop 1 (SS1) |
| Safety Integrity Level (SIL) | Safe switched off torque (STO) / SIL 3 / SILCL 3 |
| Performance Level (PL) | Safe switched off torque (STO) / category 4 performance level e |
| Diagnose degree of coverage [%] | 97 |
| SFF Safe Failure Fraction [%] | 99,17 |
| Hardware error tolerance | 1 |
| Proof test interval [A] | 20 |
Dodatne informacije o OT-FESTO038131
| Teža | 2,4 kg / Kos |
| GTIN | 4052568243258 |
| Številka carinskega blaga | 85044085 |
| Proizvajalec | Festo |
Dokumenti
- Group data sheet: CMMP-AS-M3 (english) (PDF)
- Dokumentacijo (slovene) (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: